Internal controllers

PCI-E CARD 1xRS232

Réf. : 306572

1-PORT RS-232 SERIAL PCI-EXPRESS CARD
- Supports 1x UART serial port
- Built-in 16C550 compatible UART with 16-byte transmit-receive FIFO
- Data transfer rate up to 230400bps

PCIe I/O Combo Card LP- 2 x RS232 Serial + 1 x Parallel

Réf. : 306587

PCI-EXPRESS CARD WITH 2 x RS-232 SERIAL PORTS AND 1 PARALLEL PORT
- Supports 2x UART serial port
- Built-in 16C550 compatible UART with 16 byte transmit-receive FIFO
- Data transfer rate up to 230400bps
- Parallel data transfer rate up to 1.5MB/Sec

M.2 NGFF SATA to 2.5" SATA Adapter

Réf. : 307604

Get advantage of the M.2 speed while keeping your existing SATA hardware. The dimensions and connector layout are similar on both M.2 and SATA. You can thus install a new-generation M.2 SSD in any 2.5'' SATA equipment.

Product benefits:

- A new-generation M.2 NGFF SATA SSD can fit into a standard 2.5'' SATA SSD space
- Venting grids for optimum cooling
- Transparent for the system

Main features:

- Convert M.2 NGFF SATA SSD to standard 2.5'' SATA Form Factor
- M.2 NGFF type 2280-xx-B connector on board
- Supports M.2 NGFF type 2280, 2260, 2242 and 2230 plated-hole
- 100% Compatible with 2.5'' SATA drive mechanical spec
- 22 pin SATA (Signals and Power) male connector on board
- Includes 2.5'' drive metal frame with 8 mounting holes and 4 HDD screws
- Supports any OS like Windows, Mac and Linux
- Dimension of PCBA with 2.5'' frame : 100.45mm x 69.85mm x 7mm
- Fully RoHS compliant

PCI Express Host Adapter for M.2 NGFF PCIe SSD

Réf. : 307625

Shift up a gear!

This NGFF to PCI-express adapter increases the performances of your system. You+ll take advantage of
the M.2 SSD in PCI-Express mode.

Product benefits:

- Easy and rapid connection of an M2 SSD to your motherboard
- Throughputs up to 32Gbps instead of the traditional 6 Gbps of SATA interface
- Transparent to the operating system, no drivers needed

Main features:

- Includes standard and low-profile slot brackets
- Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260 and 2242 SSD
- Connectors on the SSD side: M.2 NGFF type 2280-D5-M
- Connectors on the motherboard side: PCI-Express x4
- Includes 2 mounting screws
- Compatible with the following OS: 10, Win8.1, Windows Server 2012 R2, Linux, Fedora, SUSE, Ubuntu,
Red Hat

AC1350 wireless dual band gigabit ceiling mount access point

Réf. : 307660

[triumph] U-750 pci-e usb 3.0 4-Port (3+1) card

Réf. : 313011

Mini SATA SSD to 2.5" SATA HDD converter board

Réf. : 307603

Convert Fast Speed mSATA SSD to SATA host port connection!

Product features:

- Provides security and comfort of use with anti-vibration system.
- mSATA model for SSD drive support
- SATA7+15
- The mSATA SSD can be the primary bootable device containing the OS and application.
- Transparent to the operating system and does not require any driver
- Compatible with SATA I, SATA II and SATA III (6Gbps)
- Compatible with Windows, Mac and Linux OS
- Fully RoHS compliant

PCI Express I/ O Card- 1 x Parallel Port

Réf. : 306583

This PCI Express 1x extension board is compatible with 4x/8x/16x slots. The board provides an additional communication LTPx port to your computer.

Product features:

- 1 x DB-25 female port on slot bracket
- Compatible with PCI-Express 1.0a specifications
- 1 x ECP communication port compatible with SPP and EPP
- Data transfer rate up to 1.5 Mbps
- Moschip chipset
- Drivers for Windows2000/ XP/ Server/ Vista/7 32-64 bits and Linux
- Includes a standard and a low-profile slot brackets

Dual Type A/C USB 3.1 PCI Express Card- 2 Ports

Réf. : 303024

Add a Gigabit connection to your motherboard!

The USB3.1 PCI Express controller provides data transfer rates at up to 10 Gbps
The new-generation C-type connector is compatible with all USB3.1 type C devices coming on the market. The A-type connector provides compliancy with old-generation devices.

Product benefits:

- 2 times faster than USB3.0 and 20 times faster than USB2.0
- Up to 10-Gigabit bandwidth performance with low latency
- Compliant with eXensible Host Controller Interface (xHCI) specifications rev.1.1
- Supports over current detection
- Compatible with the new-generation C-type connectors
- Down-compatible with the A-type connectors
- Down-compatible with USB3.0/ USB2.0/ USB1.1 specifications
- Standard and low-profile slot brackets included

Main features:

- USB3.0 controller
- Chipset: ASMEDIA
- Output connectors: 1 x USB type A & 1 x USB type C
- Connectors on the motherboard side: PCI Express x 4 & 10-pin Molex
- Compliant with PCI Express Base 3.0 Specification
- Supports PCI Express Gen2 x2 or Gen3 x1
- Compatible with the following Oss: Windows 7/ Windows 8x/ Windows 10
- Standard and low-profile form factors

PCI-Express to SATA Controller Dual Channel- 2 int/2 ext P

Réf. : 306556

The SATA II host controller will speed up your HDD.

- Supports LBA 48-bit management for high-capacity HDDs
- PCI Express form factor, 1x compatible with 4x/8x/16x
- Independant SATA II channels compatible with SATA I HDD
- SATA II controller, supports data transfer rate up to 3.0 Gbps
- Equipped with 4 connectors (2 internal/ 2 external)
- Channel setup by jumper
- Equippped with a Silicon Image chipset
- Drivers for Windows NT, Windows 2000, Windows XP, Server 2003 & Vista 64/32-bit

USB 3.1 PCI express card- 2 x type A ports

Réf. : 303025

Get 10 Gbps without changing your motherboard!

This USB3.1 controller board provides USB3.1 technology so that you can reach up to 10 Gbps data transfer rate.
The board has two USB Type A connectors and is fully compatible with old-generation USB devices.

Product benefits:

- 2 times faster than USB3.0 and 20 times faster than USB2.0 interfaces
- Maximum data transfer rate: 10 Gbps
- Down-compatible with Type A USB connectors
- Down-compatible with USB3.0/ USB2.0/ USB1.1 interfaces
- Includes a standard and a low-profile slot brackets

Main features:

- USB3.1 controller
- Chipset: ASMEDIA
- Output connectors: 2 x USB Type A
- Connectors on the mother board side: PCI Express 4x and 4-pin Molex (for external power supply)
- Compatible with the following operating systems: Windows 7, Windows 8x, Windows 10
- Standard and Low-Profile slot brackets included

PCI Express SATA III Adapter 6Gbps- 4 SATA+2 eSATA Ports

Réf. : 306084

This board is a single-chip, PCI Express to four SATA Gen III 6Gb/s channels host controller that brings server-class features to the desktop.
This board enables the use of the industry+s newest and fastest hard drives at 6Gb/s while providing
backward compatibility to legacy SATA 1.5Gb/s or 3Gb/s drives. It uses the same cable and connectors
as previous SATA generations to ease integration. Besides, PCI Express 2.0 double the bandwidth of the existing PCI Express bus for faster data throughput.

Using the onboard RAID firmware, the 4 SATA drives attached to this controller can be easily configured as 4 individual ports with no RAID or with RAID 0, RAID 1, RAID 10, and HyperDuo modes.

Product features:

- Compliant with PCI-Express Specification v2.0 and backward compatible with PCI-Express 1.x
- Compliant with Serial ATA Specification 3.0
- PCI Express x2 interface, compatible with PCI Express x4, x8 and x16 slots
- Supports communication speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
- Hot plug and Hot Swap
- Supports Native Command Queuing (NCQ)
- Supports Port Multiplier FIS based switching or command based switching
- Compatible with SATA 6G, 3G and 1.5G Hard Drives
- Supports RAID function: RAID 0, RAID 1, RAID 10 and HyperDuo
- Supports Windows® XP/Vista/7/8 and Server 2008 R2

Dual Type A/C USB 3.1 PCI Express Card- 2 Ports

Réf. : 303027

Add a Gigabit connection to your motherboard!

The USB3.1 PCI Express controller provides data transfer rates at up to 10 Gbps
The new-generation C-type connector is compatible with all USB3.1 type C devices coming on the market. The A-type connector provides compliancy with old-generation devices.

Product benefits:

- 2 times faster than USB3.0 and 20 times faster than USB2.0
- Up to 10-Gigabit bandwidth performance with low latency
- Compliant with eXensible Host Controller Interface (xHCI) specifications rev.1.1
- Supports over current detection
- Compatible with the new-generation C-type connectors
- Down-compatible with the A-type connectors
- Down-compatible with USB3.0/ USB2.0/ USB1.1 specifications
- Standard and low-profile slot brackets included

Main features:

- USB3.0 controller
- Chipset: ASMEDIA
- Output connectors: 1 x USB type A & 1 x USB type C
- Connectors on the motherboard side: PCI Express x 4 & 10-pin Molex
- Compliant with PCI Express Base 3.0 Specification
- Supports PCI Express Gen2 x2 or Gen3 x1
- Compatible with the following Oss: Windows 7/ Windows 8x/ Windows 10
- Standard and low-profile form factors

DEXLAN PCI Multi I/O Card- 4 x Serial RS232 + 1 x IEEE1284

Réf. : 920351

RS232 4-Ports + Parallel 1-Port
Features
Plug and Play - Automatically Selects IRQ and I/O Address
Supports PCI IRQ Sharing
Specification
General
PCI 32-Bit 33MHz Interface
Compliant with PCI Specification Revision 2.2
Support PCI Bus-Master Access
Fully Plug & Play compatible
MS Windows 98SE/ME/2000/XP/NT4.0/Server 2003/XP 64-bit, Linux
Serial interface
Compatible with standard 16C950 UART with 128-Byte Transmit-Receive FIFO
Backward compatible to 16C550 UART
Fast data rates up to 15Mbytes/Sec
Automatic In-Band Flow Control Using Xon/Xoff Handshaking Supported
Automatic Out-of-Band Flow Control Using CTS#/RTS# and/or DST#/DTR# Supported
DB9 serial port connector x 2
Pin Header serial port connector x 2
Parallel interface
SPP, PS2, EPP, ECP Compatible IEEE 1284 Printer Port
Fast Data Rates up to 1.5 MBytes/Sec
Built-in 16-Byte FIFO
Pin header parallel port connector x 1

3 Ports USB 3.0 + 1000Mbps Ethernet PCI-Express x1 Card

Réf. : 321013

SATA III 6 Gbps LP PCIe Host Adapter- 2 Ports

Réf. : 305321

2-Port 6Gbps SATA Low Profile PCIe Gen2 Host Adapter with NCQ support.

Product benefits:

- Supports RAID 0/RAID 1 hardware modes

Product features:

- 2 x 6Gbps SATA III Ports
- Supports 5Gbps PCI Express 2.0
- Fully compliant with Serial ATA specifications 3.0
- Supports SATA III transfer rates: 6.0Gbps, 3.0Gbps 1.5Gbps
- Supports ATA and ATAPI commands
- Supports Native Command Queuing (NCQ)
- Supports AES-256
- 48-bit LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Low-Profile PCI Form Factor
- Includes an additional Low Profile Bracket
- Hot-plug capability
- Two Pin headers on board for LED connection
- Drivers for 64bit / 32bit Windows 7, Vista, XP
- RoHS compliant

Package contents:

- SATA III PCI Express adapter
- User guide
- Drivers on CD

N300 wireless poe ceiling/wall mount access point

Réf. : 307665

PCI express Card- 2 x RS232 DB9 serial ports

Réf. : 306588

PCI-EXPRESS CARD WITH 2 PORTS SERIAL RS-232
- Supports 2x UART serial port
- Build in 16C550 compatible UART with 16 byte transmit-receive FIFO
- Data transfer rate up to 230400bps

AC1350 wireless dual band gigabit ceiling mount access point

Réf. : 307661

7 Ports USB 3.0 PCI Express x 1 Card NEC

Réf. : 306167