Connectors

Power extension cable for fan with 4 pins- 45 cm

Réf. : 146876

This extension power cable is ideal for full-size PC cases.

Product features:

- Input connector: 4-pin female
- Output connector: 4-pin male
- Cable length: 45 cm.

Sata cable- 50 cm

Réf. : 314012

Connection of a HDD, SSD, SATA optical drive to a motherboard or controller board equipped with SATA
interface.
Compatible with SATA, SATA2 and SATA3.0 (6Gbps)

Product features:

- Input connector: 1 x SATA
- Output connector: 1 x SATA
- Cable length: 50 cm
- Security latches on the connectors

SATA to Molex power adapter without cable

Réf. : 147554

This adapter is ideal to connect an old-generation HDD to a SATA power supply.

Main features :

- Input connector: 1 x SATA male
- Output connector: 1 x 4-pin Molex female
- Dimensions: 4.8 cm without cable

SATA Cable angled down- 50 cm

Réf. : 314014

Connection of a HDD, SSD, or SATA optical drive to a motherboard or SATA host controller.
Compatible with SATA, SATA II and SATA III (6Gbps)

Main features:

- Input connector: 1 x Serial ATA
- Output connector: 1 x Serial ATA 90 degree angled down
- Cable length: 50 cm

Molex to SATA angled power adapter cable- 15 cm

Réf. : 147553

The downward-angled, 90-degree SATA power connector allows this cable to be used where normal straight connector cables cannot, accommodating tighter space limitations while minimizing the strain on the cable.
This adapter cable is ideal to connect a SATA HDD to a power supply with no/ not enough SATA connector(s).

Main features :

- Input connector: 1 x 4-pin Molex male
- Output connector: 1 x SATA downward-angled female
- Cable length: 15 cm

Power extension cable for 24-pin ATX motherboard- 20 cm

Réf. : 146815

Can extend the ATX power cable to a 24-pin motherboard.
Ideal for full-size PC cases.

Main features:

- Input connector: 24-pin ATX
- Output connector: 24-pin ATX
- Cable length: 20 cm

Motherboard power adapter cable 20 Pin to 24 Pin

Réf. : 314060

Connection of a 20-pin ATX power supply to a motherboard equipped only with 24-pin ATX connectors.
The wiring diagram complies with the EPS/12V specifications on the 24-pin side and with the ATX 2.x specifications on the 20-pin side.

Product features:

- Input connector: 1 x 20-pin ATX
- Output connector: 1 x 24-pin ATX
- Cable length: 20 cm

Power splitter cable for fan with 3 pins-45 cm

Réf. : 146881

This Y power cable provides additional power to your cooling system.

Product features:

- Input connector: 1 x 3-pin female
- Output connector: 2 x 3-pin male
- Cable length: 30 cm.

SATA to 3 x SATA power adapter cable- 30 cm

Réf. : 147563

This power cable adapter is ideal to connect 3 HDDs from a single SATA power supply.

Main features:

- Input connector: 1 x SATA male
- Output connectors: 3 x SATA female
- Cable length: 30 cm

Molex to PCI Express 6-pin power adapter cable

Réf. : 146691

Changes 2 x Molex connectors into a PCI-Express 6-pin connector, to supply the power
to a graphic card. It is indispensable for the power supplies that don't have any PCI-e power connector.

Product features:

- Input connectors: 2 x Molex 4-pin male connectors
- Output connectors: 1 x PCI-e 6-pin connector
- Cable length: 20 cm

Motherboard Adapter- 2 x USB2.0 internal ports

Réf. : 307822

This adapter adds 2 x USB2.0 Type A female connectors to your PC case.
Ideal for the following devices installed in a front space:

- USB duplicator
- Memory card reader
- USB wireless adapter; etc...

Product features:

- Input connector: 1 x USB2.0 9-pin DIP
- Output connectors: 2 x USB2.0 Type A female
- Supported data transfer rates: 1.5/ 12/ 480 Mbit/s
- Without cable

Power extension cable for fan with 3 pins- 45 cm

Réf. : 146871

This adapter cable is ideal for full-size PC cases.

Main features :

- Input connector : 3-pin female
- Output connector: 3-pin male
- Cable length: 45 cm

Sata power extension - 20 cm

Réf. : 147564

This cable can extend the SATA connection, up to 20 cm. It is ideal for large size PC cases.

Main features:

- Input connector: 1 x SATA male connector
- Output connector: 1 x SATA female connector
- Cable length: 20 cm

Molex to SATA power cable - 20 cm

Réf. : 147550

This power adapter cable is ideal to connect a SATA HDD to a power supply lacking SATA connector(s).

Product features:

- Input connector: 1 x 4-pin Molex male
- Output connector: 1 x SATA female
- Cable length: 15 cm.

SATA Cable-20 cm

Réf. : 147630

This SATA adapter cable allows the connection of devices such as HDDs, SSDs, SATA optical drives to a motherboard or controller board with SATA interface.
Compatible with SATA, SATA2 and SATA3.0 (6 Gbps)

Product features:

- Input connector: 1 x Serial ATA
- Output connector: 1 x Serial ATA
- Cable length: 20 cm.

Slot Bracket with 2 x USB3.0 Ports

Réf. : 146699

Slot bracket for connection to your motherboard. It provides 2 external USB3.0 ports.
With a 25-cm cable.

Product features:

- Internal connector: 10-pin DIP (2 x 5)
- Bracket connectors: USB3.0 female type A
- Cable length: 25 cm.

SATA to 3 x Molex power cable adapter- 30 cm

Réf. : 147559

This adapter can split the SATA power connector into 3 x 4-pin Molex plugs.
Ideal to connect up to 3 devices over Molex from a single SATA power supply.

Main features :

- Input connector: 1 x SATA male
- Output connector(s): 3 x 4-pin Molex female
- Cable length: 30 cm

SATA to 2 x SATA + Molex power adapter cable- 30 cm

Réf. : 147557

Splits the SATA power connector into 2 SATA power connectors + 1 x 4-pin Molex power connectors.
Ideal to connect 3 devices (HDDs)

Product features:

- Input connector: 1 x SATA male
- Output connectors: 2 x SATA female + 1 x 4-pin Molex female
- Cable length: 30 cm

SATA cable- 75 cm

Réf. : 314013

Connection of a HDD, SSD or SATA optical drive to a motherboard with SATA interface.
Compatible with SATA, SATA 2 and SATA 3.0 (6Gbps)

Main features:

- Input connector: 1 x SATA
- Output connector: 1 x SATA
- Cable length: 75 cm

Molex to 2 x SATA power adapter cable- 15 cm

Réf. : 147552

This adapter cable supplies the power to 2 x SATA HDDs, from a single Molex power connector. The 4-
pin Molex connector is split into 2 x SATA connectors.

Product features:

- Input connector : 1 x 4-pin Molex male
- Output connector: 2 x SATA Female
- Cable length: 15 cm.

USB3.0 Slot Bracket- 2 Ports

Réf. : 146697

This slot cable is to be connected to a USB slot of your motherboard. It adds 2 external USB3.0 ports. It has two 10-pin DIP and 2 x USB3.0 type A female connectors, linked by a 25-cm cord.

Product features:

- Internal connector: 10-pin DIP (2 x 5)
- Bracket connectors: USB3.0 female type A
- Cable length: 25 cm.

ATX P4 power adapter cable for motherboard- 20 cm

Réf. : 147560

This power adapter cable makes it possible to connect the P4 ATX (ATX12V1) of a motherboard to a 4-
pin standard Molex connector. The adapter is dedicated to the CPU power supply. Without it, you can't
power up your PC.

Product features:

• Input connector : 1x 4-pin Molex male connector
• Output connector : 1x ATX P4
• Cable length : 20 cm.

Molex power adapter cable for fan-3 pins

Réf. : 146851

This adapter cable supports a 3-pin connector that supplies the power to a fan. The adapter is equipped with 2 Molex connectors, so that you can keep the existing HDD connection.

Product features:

- Input connector: 4-pin Molex male
- Output connectors: 3-pin male + 4-pin female Molex
- Cable length: 25 cm.

PCI Express 6-pin Y power cable- 15 cm

Réf. : 146694

Split a PCI-Express 6-pin power connector into 2 x PCI-e connectors to supply the power to a
graphic card that requires 2 x power supplies or two graphic cards.
An indispensable low-cost solution for the power supplies that are not equipped with a PCI-Express power supply.

Product features:

- Input connector: 1 x PCI-Express 6-pin connector
- Output connectors: 2 x PCI-Express 6-pin connectors
- Cable length: 15 cm.

ATX P4 power extension cable for motherboard-20 cm

Réf. : 147562

You can extend the ATX P4 (ATX12V1) existing power cable for motherboard connection. This cable supplies the power to the CPU, and without it, the system cannot be powered on.

Main features:

- Input connector: 1 x ATX P4 female
- Output connector: 1 x ATX P4 male
- Cable length: 20 cm