Fiber transceiver modules

DAC SFP+ 10G 5m compatible Cisco SMB/Catalyst

Réf. : 311777

ALLIED TELESIS AT-SPLX10/I

Réf. : 746349

NETGEAR AX743

Réf. : 315010

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311906

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

TP LINK TL SM311M Mini GBiC Module- Multimode LC

Réf. : 311899

TP LINK TL SM311LS Mini GBiC Module- Single Mode LC

Réf. : 311895

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

10GBase-LR sfp+ module singlemode 10kms + ddm

Réf. : 311825

This bidirectional expansion module was designed for Gigabit Ethernet switches equipped with SFP+ slots. The module supports Digital Diagnostic function, based on the SFF-8472 industrial standard. This function allows the device to receive real-time information (input/output signals, laser temperature...)

Product features:

- Fiber optic port: Duplex single-mode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 10 km over 9/125µm (OS1 5km/OS2 10km)
- Compatible with the following standards: IEEE802.3ae 10GBASE-LR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function: SFF8472 Rev.9.2
- Wavelength: 1310nm
- Data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with Multi-Source-Agreement (MSA)
- Hot-swappable
- Compliant with SFP form factor: 57 x 13.3 x 8.5 mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 311799

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

FiberTransceiver module Single Mode MiniGBiC 1000 LX -10 km

Réf. : 311795

Bidirectional long-distance fiber module for Ethernet switch equipped with SFP ports.
The digital diagnostic monitoring interface for optical transceivers allows real-time access to
the device's operating parameters.

Product features:

- Duplex Single mode fiber port with LC connectors
- Gigabit link up to a 10-km distance over single mode 9/125µm
- Compliant with the IEEE802.3z Gigabit standard
- Wavelength: PP 1310nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- MSA-compatible
- Hot-swappable
- Digital Diagnostic Monitoring technology
- SFP-compatible (Small Form Factor Pluggable): 55.5 x 13.5 x 8.5mm
- Class 1-compatible Laser product, compliant with the EN 60825-1 standard.

SFP 1000LX compatible Cisco Catalyst

Réf. : 311780

DAC SFP+ 10G 3m compatible Cisco SMB/Catalyst

Réf. : 311779

DAC SFP+ 10G 1m compatible Cisco SMB/Catalyst

Réf. : 311778

HUAWEI FIBER MODULE MULTIMODE MINIGBIC 1000SX 550M

Réf. : 101500

SFP+ 10G LR compatible Cisco SMB/Catalyst

Réf. : 311776

SFP 1000LX compatible Cisco SMB Series

Réf. : 311775

SFP+ 10G SR compatible Cisco SMB/Catalyst

Réf. : 311774

SFP 1000SX compatible Cisco SMB Series

Réf. : 311773

SFP 1000SX compatible Cisco Catalyst

Réf. : 311771

SFP 1000LX Compatible Aruba HP J4859D

Réf. : 311762

SFP 1000SX Compatible Aruba HP J4858D

Réf. : 311761

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 260136

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

HUAWEI FIBER MODULE 9,8G SINGLEMODE MINIGBIC LR 1,4km

Réf. : 101525

HUAWEI FIBER MODULE SINGLEMODE MINIGBIC 1000LX 10KM

Réf. : 101510

HUAWEI SFP+ 10G High Speed Cable 1m

Réf. : 101503