Industrial automation

HWg-STE2 wifi+poe ethernet thermometer w/di imput

Réf. : 600753

The new HWg-STE2 is a stand-alone and easy-to-operate thermometer, which can control the temperature
of a server room 24-hours-a-day.
The SET2 is sold with a Uni-Wire temperature sensor set on a 3-meter cord with RJ-11 modular plug. In case of an event, an alarm notification is sent by E-mail, for example if the temperature rises above the user-defined threshold.
The SET2 has two dry contacts that can be used to connect optional sensors: motion detection, door lock release, smoke detector and more.
In addition, the system includes a graphic user interface, so that you can edit a spreadsheet of data analysis if needed.
The PoE function and Wi-Fi implementation make it possible to install the device in wired/ wireless mode in an existing network.

Configuration and management:

- By web interface (IE/Firefox/Chrome)
- By central software management over SNMP protocol
- From your smartphone with the free app dedicated to iPhone & Android

The HWg-SET2 thermometer includes 1 sensor and supports up to 3 connected sensors per unit.

Applications:
- Control and maintenance of servers, switches, telephones, etc
- Control and maintenance of UPS, backup power supplies, generators, etc
- Control and data survey of cold rooms (hospitals, food storage facilities)
- Heating and Cooling system surveillance
- Air flow and humidity control

Specifications:

- Stand-alone system, no software required
- The device can be integrated into an existing surveillance system
- Easy installation
- DHCP support
- Compatible with SNMP and XML protocols
- Display modes: °C, °F, °K
- E-mail notification if the temperature goes beyond or below the thresholds
- 2 x RJ-11 ports
- Three sensors can be connected to the device (1 is included in the package)
- 2 x dry contacts on terminal block
- 1 x 10/100 RJ-45 PoE 802.3af port
- 1 x Wi-Fi 11n client for wireless connection to the network infrastructure
- Windows-based HWg-PDMS software included
- Compatible with other surveillance systems (industrial networks, IT infrastructures)
- Support and Plug-In for most NMS applications (InterMapper, LoriotPro, HP OpenView, Nagios, IBM Tivoli, SNMPc, MRTG and more)
- E-mail notification
- Each sensor has its proper ID
- Password protection, IP address field, protected against non-compatible hardware
- Comes with a temperature controller set on a 3-meter cable and a power adapter

HWg ARES 12 GSM Thermometer with email (GPRS) and SMS alerts

Réf. : 600524

Ares12 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers).
Two RJ-11 ports for temperature and/ or humidity probe connection
Two digital inputs for dry contacts (smoke detector, door sensor, IR motion detector)

Specifications :
- 2 RJ-11 ports for 1-Wire UNI probe (up to 3)
- 2 dry contact inputs
- 1 slot for SIM GSM / GPRS card
- 1 MiniUSB port for PC-based configuration
- 1 internal battery for backup in case of a power failure
- Compatible Nagios software program (Plug-in available)

HWg-STE2 PLUS WiFi+PoE Ethernet Thermometer w/DI Imput

Réf. : 600819

Temp probe 1 wire 10M IP67

Réf. : 600586

WLD2 PoE SET Water Leak Detector

Réf. : 600787

HWG Sensor CO2 1W-UNI

Réf. : 600746

Flood detector 1W-UNI 3m for poseidon/ares

Réf. : 600579

PIR MOTION AND PRESENCE DETECTOR

Réf. : 600236

The PIR motion detector is designed for property protection. For high connectivity, the product is equipped with a free pair of terminals.
It uses multiple signal analyzing methods. As a result, it achieves excellent sensitivity and high immunity against false alarms. Detection analyses can be increased with an adjustable jumper (in case the product is mounted in problematic locations).

Specifications :

Power supply : 12 V DC ± 25%
Consumption (without the LEDs): max.10 mA
The highest consumption (including the LEDs): max. 35 mA
Maximum conductor's cross-section: 1 mm2
Recommended installation height: 2.5 m above floor level
Detection angle / sensitivity radius: 120° / 12 m
Stabilization time after powering on: max. 180 s
Current carrying capacity of PIR output: switch max. 60V / 50 mA inner resistance max.30 Ohm
Current carrying capacity of TMP output: switch max. 60 V / 50 mA inner resistance max.16 Ohm Operating temperature range: -10 to +55 °C

5.5V DC 3A POWER SUPPLY UNIT

Réf. : 605003

AKCP SensorProbe Virtual Sensor 5 units

Réf. : 605004

AKCP SensorProbe1+ License Basic to PRO

Réf. : 605002

AKCP SensorProbe1+THS 5ft cable

Réf. : 605001

AKCP SensorProbe1+ 5ft cable

Réf. : 605000

AKCP SensorProbe2+ Basic 2 PoE active port

Réf. : 605020

AKCP SensorProbe1+ License Basic to PRO

Réf. : 605021

Wall Mounting Kit with 2 Plates Countersunk Screws

Réf. : 308327

DIN rail adjustable rackmount kit

Réf. : 754906

HTemp-1-Wire Outdoor Temperature + Humidity Sensor

Réf. : 600679

HWg ARES 12 GSM Thermometer with email (GPRS) and SMS alerts

Réf. : 600673

Ares12 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers).
Two RJ-11 ports for temperature and/ or humidity probe connection
Two digital inputs for dry contacts (smoke detector, door sensor, IR motion detector)

Specifications :
- 2 RJ-11 ports for 1-Wire UNI probe (up to 3)
- 2 dry contact inputs
- 1 slot for SIM GSM / GPRS card
- 1 MiniUSB port for PC-based configuration
- 1 internal battery for backup in case of a power failure
- Compatible Nagios software program (Plug-in available)

MAINS VOLTAGE DETECTOR AND SWITCH

Réf. : 600599

The PowerEgg is designed to detect and switch on/off your mains voltage.
The controlling circuit and the controlled circuit are both electrically insulated.
The PowerEgg can be coupled with a Poseidon 3268 if you need to be alerted by e-mail or SNMP Trap in
case of a power outage.
Can be connected directly to a dry contact for access control or to a smoke detector.

Specifications:

- Supports 110 / 230 V 8 amp
- Equipped with two IEC connectors :C14 plug at the input and C13 plug at the output
- Includes two functions in a single device: Mains voltage detection at the input and Voltage control at the output

POSEIDON 2 IP UNIT FOR TEMPERATURE AND HUMIDITY SENSORS

Réf. : 600591

Poseidon2 3266 is an IP unit which can control the temperature and humidity rate and send an e-mail in case of an abnormality. The unit can also send an SNMP Trap to a professional management software.
Configuration and management via web browser, network protocols (SNMP, XML, ModBus/TCP and others)

- 4 dry contact inputs (door sensor, smoke detector)
- 2 x RJ12 ports: 1 to 8 temperature sensors/ humidity sensors) c

Applications:

- Network/ Server cabinet temperature controller
- Temperature and humidity monitor, security and telephone controller
- Air conditionning controller, backup power controller (UPS, generator)
- Storage room controller
- Heat controller, etc

Temperature sensor Temp-1Wire 3m IP67

Réf. : 600584

WLD A prolong cable 5m

Réf. : 600496

FLOOD DETECTOR

Réf. : 600463

The detector works as an indicator of a room being flooded by water (e.g. cellars, bathrooms). This information is sent to an alarm system to send out an alert message. It is possible to connect the detector to an alarm system.

Specifications:

- Operational temperature range: -10 to +40 °C
- Output: 200 mA max.
- Power supply: 12 V DC ± 15% / 2 mA
- Alarm condition: water flood
- Complies with EN 50130-4, EN 55022

OPTICAL SMOKE DETECTOR

Réf. : 600427

This optical smoke detector is specifically designed for air-conditioning control in server rooms.
When smoke is detected, the LED light switches on and sends the information to the dry contacts of a
monitoring central unit.
Does not detect the temperature variations.

Specifications:

- Operation range: 40 m² space with a 7-meter height maximum
- Distance between two smoke detectors: 8 meters maximum
- DC 12V/ 35mA power supply via power adapter or central management unit