HWg STE Temperature and Humidity Controller over IP

Réf. : 600390

The HWg-STE is a simple and stand-alone device which allows you to monitor and control the temperature and humidity rate of a server room around the clock.
With an optional sensor, the device can send e-mail alerts if the temperature is tool high or too low. The web-based management interface produces MS Excel reports.

TCP/IP configuration and threshold values can be set by web browser.
The monitoring is performed by the following means:

- Via web browser (IE/ Firefox/ Chrome)
- Embedded central management software via SNMP protocol
- From your mobile terminal by free app (iPhone/ Android)

The HWg-STE Ethernet thermometer comes with a sensor and supports up to 2 sensors per unit for temperature and humidity control.

Applications :

- Monitoring of the following: server, switch, telephone systems•
- Monitoring of the server rooms to prevent any failure due to the air conditioning unit operation
- Monitoring of backup power supplies, UPS and generator
- Monitoring and recording of environmental conditions in refrigerating storage rooms, freezers, refrigerators (food and drug industry)
- Monitoring of air flows, water evaporation

Spécifications :
- Stand-alone solution without any software but that can be integrated into a more global monitoring
system.
- Easy setup, supports DHCP server
- Support SNMP (MIB included) and XML
- Displays the values in °C, °K, °F
- Send e-mail alerts if the temperature is too low or too high compared to the threshold values
- 2 RJ11 ports for the connection of 2 probes
- Windows HWg-PDMS based software included
- Configuration and instant values accessible from a web browser
- Can be connected to any monitoring system in industrial environment
- Support and Plugin for most NMS applications such as InterMapper, LoriotPro, HP OpenView, Nagios, IBM Tivoli, SNMPc, MRTG etc
- Unique ID for each sensor
- Password protection, IP address range, protection against configuration changes
- Sold with a temperature probe on a 3-meter cable and a power suuply

HWg ARES 12 GSM Thermometer with email (GPRS) and SMS alerts

Réf. : 600524

Ares12 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup. Alerts to power failures by email or SMS (up to 5 phone numbers).
Two RJ-11 ports for temperature and/ or humidity probe connection
Two digital inputs for dry contacts (smoke detector, door sensor, IR motion detector)

Specifications :
- 2 RJ-11 ports for 1-Wire UNI probe (up to 3)
- 2 dry contact inputs
- 1 slot for SIM GSM / GPRS card
- 1 MiniUSB port for PC-based configuration
- 1 internal battery for backup in case of a power failure
- Compatible Nagios software program (Plug-in available)

HWg-STE2 wifi+poe ethernet thermometer w/di imput

Réf. : 600753

The new HWg-STE2 is a stand-alone and easy-to-operate thermometer, which can control the temperature
of a server room 24-hours-a-day.
The SET2 is sold with a Uni-Wire temperature sensor set on a 3-meter cord with RJ-11 modular plug. In case of an event, an alarm notification is sent by E-mail, for example if the temperature rises above the user-defined threshold.
The SET2 has two dry contacts that can be used to connect optional sensors: motion detection, door lock release, smoke detector and more.
In addition, the system includes a graphic user interface, so that you can edit a spreadsheet of data analysis if needed.
The PoE function and Wi-Fi implementation make it possible to install the device in wired/ wireless mode in an existing network.

Configuration and management:

- By web interface (IE/Firefox/Chrome)
- By central software management over SNMP protocol
- From your smartphone with the free app dedicated to iPhone & Android

The HWg-SET2 thermometer includes 1 sensor and supports up to 3 connected sensors per unit.

Applications:
- Control and maintenance of servers, switches, telephones, etc
- Control and maintenance of UPS, backup power supplies, generators, etc
- Control and data survey of cold rooms (hospitals, food storage facilities)
- Heating and Cooling system surveillance
- Air flow and humidity control

Specifications:

- Stand-alone system, no software required
- The device can be integrated into an existing surveillance system
- Easy installation
- DHCP support
- Compatible with SNMP and XML protocols
- Display modes: °C, °F, °K
- E-mail notification if the temperature goes beyond or below the thresholds
- 2 x RJ-11 ports
- Three sensors can be connected to the device (1 is included in the package)
- 2 x dry contacts on terminal block
- 1 x 10/100 RJ-45 PoE 802.3af port
- 1 x Wi-Fi 11n client for wireless connection to the network infrastructure
- Windows-based HWg-PDMS software included
- Compatible with other surveillance systems (industrial networks, IT infrastructures)
- Support and Plug-In for most NMS applications (InterMapper, LoriotPro, HP OpenView, Nagios, IBM Tivoli, SNMPc, MRTG and more)
- E-mail notification
- Each sensor has its proper ID
- Password protection, IP address field, protected against non-compatible hardware
- Comes with a temperature controller set on a 3-meter cable and a power adapter

POSEIDON 2 IP UNIT FOR TEMPERATURE AND HUMIDITY SENSORS

Réf. : 600591

Poseidon2 3266 is an IP unit which can control the temperature and humidity rate and send an e-mail in case of an abnormality. The unit can also send an SNMP Trap to a professional management software.
Configuration and management via web browser, network protocols (SNMP, XML, ModBus/TCP and others)

- 4 dry contact inputs (door sensor, smoke detector)
- 2 x RJ12 ports: 1 to 8 temperature sensors/ humidity sensors) c

Applications:

- Network/ Server cabinet temperature controller
- Temperature and humidity monitor, security and telephone controller
- Air conditionning controller, backup power controller (UPS, generator)
- Storage room controller
- Heat controller, etc

OPTICAL SMOKE DETECTOR

Réf. : 600427

This optical smoke detector is specifically designed for air-conditioning control in server rooms.
When smoke is detected, the LED light switches on and sends the information to the dry contacts of a
monitoring central unit.
Does not detect the temperature variations.

Specifications:

- Operation range: 40 m² space with a 7-meter height maximum
- Distance between two smoke detectors: 8 meters maximum
- DC 12V/ 35mA power supply via power adapter or central management unit

Temperature Sensor

Réf. : 261140

Temperature & Humidity Sensor

Réf. : 261240

Aten VK2100 control system

Réf. : 250997

ATEN Control System VK1100A - Compact Control Box Gen2

Réf. : 250998

Aten VK2100 control system

Réf. : 250999

8-Port Serial Console Server with Dual Power/LAN

Réf. : 269308

PIR MOTION AND PRESENCE DETECTOR

Réf. : 600236

The PIR motion detector is designed for property protection. For high connectivity, the product is equipped with a free pair of terminals.
It uses multiple signal analyzing methods. As a result, it achieves excellent sensitivity and high immunity against false alarms. Detection analyses can be increased with an adjustable jumper (in case the product is mounted in problematic locations).

Specifications :

Power supply : 12 V DC ± 25%
Consumption (without the LEDs): max.10 mA
The highest consumption (including the LEDs): max. 35 mA
Maximum conductor's cross-section: 1 mm2
Recommended installation height: 2.5 m above floor level
Detection angle / sensitivity radius: 120° / 12 m
Stabilization time after powering on: max. 180 s
Current carrying capacity of PIR output: switch max. 60V / 50 mA inner resistance max.30 Ohm
Current carrying capacity of TMP output: switch max. 60 V / 50 mA inner resistance max.16 Ohm Operating temperature range: -10 to +55 °C

MAINS VOLTAGE DETECTOR AND SWITCH

Réf. : 600599

The PowerEgg is designed to detect and switch on/off your mains voltage.
The controlling circuit and the controlled circuit are both electrically insulated.
The PowerEgg can be coupled with a Poseidon 3268 if you need to be alerted by e-mail or SNMP Trap in
case of a power outage.
Can be connected directly to a dry contact for access control or to a smoke detector.

Specifications:

- Supports 110 / 230 V 8 amp
- Equipped with two IEC connectors :C14 plug at the input and C13 plug at the output
- Includes two functions in a single device: Mains voltage detection at the input and Voltage control at the output

HWG Sensor CO2 1W-UNI

Réf. : 600746