Internal controllers

PCIe I/O Combo Card LP- 2 x RS232 Serial + 1 x Parallel

Réf. : 306587

PCI-EXPRESS CARD WITH 2 x RS-232 SERIAL PORTS AND 1 PARALLEL PORT
- Supports 2x UART serial port
- Built-in 16C550 compatible UART with 16 byte transmit-receive FIFO
- Data transfer rate up to 230400bps
- Parallel data transfer rate up to 1.5MB/Sec

M.2 NGFF SATA to 2.5" SATA Adapter

Réf. : 307604

Get advantage of the M.2 speed while keeping your existing SATA hardware. The dimensions and connector layout are similar on both M.2 and SATA. You can thus install a new-generation M.2 SSD in any 2.5'' SATA equipment.

Product benefits:

- A new-generation M.2 NGFF SATA SSD can fit into a standard 2.5'' SATA SSD space
- Venting grids for optimum cooling
- Transparent for the system

Main features:

- Convert M.2 NGFF SATA SSD to standard 2.5'' SATA Form Factor
- M.2 NGFF type 2280-xx-B connector on board
- Supports M.2 NGFF type 2280, 2260, 2242 and 2230 plated-hole
- 100% Compatible with 2.5'' SATA drive mechanical spec
- 22 pin SATA (Signals and Power) male connector on board
- Includes 2.5'' drive metal frame with 8 mounting holes and 4 HDD screws
- Supports any OS like Windows, Mac and Linux
- Dimension of PCBA with 2.5'' frame : 100.45mm x 69.85mm x 7mm
- Fully RoHS compliant

PCI Express Host Adapter for M.2 NGFF PCIe SSD

Réf. : 307625

Shift up a gear!

This NGFF to PCI-express adapter increases the performances of your system. You+ll take advantage of
the M.2 SSD in PCI-Express mode.

Product benefits:

- Easy and rapid connection of an M2 SSD to your motherboard
- Throughputs up to 32Gbps instead of the traditional 6 Gbps of SATA interface
- Transparent to the operating system, no drivers needed

Main features:

- Includes standard and low-profile slot brackets
- Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260 and 2242 SSD
- Connectors on the SSD side: M.2 NGFF type 2280-D5-M
- Connectors on the motherboard side: PCI-Express x4
- Includes 2 mounting screws
- Compatible with the following OS: 10, Win8.1, Windows Server 2012 R2, Linux, Fedora, SUSE, Ubuntu,
Red Hat

PCI Express I/ O Card- 1 x Parallel Port

Réf. : 306583

This PCI Express 1x extension board is compatible with 4x/8x/16x slots. The board provides an additional communication LTPx port to your computer.

Product features:

- 1 x DB-25 female port on slot bracket
- Compatible with PCI-Express 1.0a specifications
- 1 x ECP communication port compatible with SPP and EPP
- Data transfer rate up to 1.5 Mbps
- Moschip chipset
- Drivers for Windows2000/ XP/ Server/ Vista/7 32-64 bits and Linux
- Includes a standard and a low-profile slot brackets

DEXLAN PCI Multi I/O Card- 4 x Serial RS232 + 1 x IEEE1284

Réf. : 920351

RS232 4-Ports + Parallel 1-Port
Features
Plug and Play - Automatically Selects IRQ and I/O Address
Supports PCI IRQ Sharing
Specification
General
PCI 32-Bit 33MHz Interface
Compliant with PCI Specification Revision 2.2
Support PCI Bus-Master Access
Fully Plug & Play compatible
MS Windows 98SE/ME/2000/XP/NT4.0/Server 2003/XP 64-bit, Linux
Serial interface
Compatible with standard 16C950 UART with 128-Byte Transmit-Receive FIFO
Backward compatible to 16C550 UART
Fast data rates up to 15Mbytes/Sec
Automatic In-Band Flow Control Using Xon/Xoff Handshaking Supported
Automatic Out-of-Band Flow Control Using CTS#/RTS# and/or DST#/DTR# Supported
DB9 serial port connector x 2
Pin Header serial port connector x 2
Parallel interface
SPP, PS2, EPP, ECP Compatible IEEE 1284 Printer Port
Fast Data Rates up to 1.5 MBytes/Sec
Built-in 16-Byte FIFO
Pin header parallel port connector x 1

SATA III 6 Gbps LP PCIe Host Adapter- 2 Ports

Réf. : 305321

2-Port 6Gbps SATA Low Profile PCIe Gen2 Host Adapter with NCQ support.

Product benefits:

- Supports RAID 0/RAID 1 hardware modes

Product features:

- 2 x 6Gbps SATA III Ports
- Supports 5Gbps PCI Express 2.0
- Fully compliant with Serial ATA specifications 3.0
- Supports SATA III transfer rates: 6.0Gbps, 3.0Gbps 1.5Gbps
- Supports ATA and ATAPI commands
- Supports Native Command Queuing (NCQ)
- Supports AES-256
- 48-bit LBA can Break Capacity-Limit to Support HDD larger than 137GB
- Low-Profile PCI Form Factor
- Includes an additional Low Profile Bracket
- Hot-plug capability
- Two Pin headers on board for LED connection
- Drivers for 64bit / 32bit Windows 7, Vista, XP
- RoHS compliant

Package contents:

- SATA III PCI Express adapter
- User guide
- Drivers on CD

3 Ports USB 3.0 + 1000Mbps Ethernet PCI-Express x1 Card

Réf. : 321013