Connectors - Page 2

Sata cable- 100 cm

Réf. : 314000

Connect a HDD, SSD or a SATA optical drive to a motherboard or SATA host controller.
Compatible with SATA, SATA 2 and SATA 3.0 (6Gbps) interfaces.

Product features:

- Input connector: 1 x Serial ATA
- Output connector: 1 x Serial ATA
- Cable length: 1 m

Molex to 2 x SATA power adapter cable- 15 cm

Réf. : 147552

This adapter cable supplies the power to 2 x SATA HDDs, from a single Molex power connector. The 4-
pin Molex connector is split into 2 x SATA connectors.

Product features:

- Input connector : 1 x 4-pin Molex male
- Output connector: 2 x SATA Female
- Cable length: 15 cm.

SATA to Molex power adapter without cable

Réf. : 147554

This adapter is ideal to connect an old-generation HDD to a SATA power supply.

Main features :

- Input connector: 1 x SATA male
- Output connector: 1 x 4-pin Molex female
- Dimensions: 4.8 cm without cable

Slot Bracket with 1 x DB9 Serial Port

Réf. : 145071

The standard slot bracket can be connected to a motherboard or serial RS-232 card. It provides an external DB9 male connector.
The bracket is equipped with a serial port and a HE 10 port connected by a 18-cm long cable.

Main features:
- Motherboard connector: female HE-10
- Serial connector: DB-9 male
- Cable length: 18 cm

HE-10 Connector Specifications:
2 4 6 8 10 (Pin # 10 poka yoke)
1 3 5 7 9 (Pin #1 is marked)

Wiring Diagram :
HE-10 - DB9 male - Signal
1 1 CD
2 2 RD
3 3 TD
4 4 DTR
5 5 Gnd
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
10 not used

SATA to 3 x SATA power adapter cable- 30 cm

Réf. : 147563

This power cable adapter is ideal to connect 3 HDDs from a single SATA power supply.

Main features:

- Input connector: 1 x SATA male
- Output connectors: 3 x SATA female
- Cable length: 30 cm

PCI Express 6-pin Y power cable- 15 cm

Réf. : 146694

Split a PCI-Express 6-pin power connector into 2 x PCI-e connectors to supply the power to a
graphic card that requires 2 x power supplies or two graphic cards.
An indispensable low-cost solution for the power supplies that are not equipped with a PCI-Express power supply.

Product features:

- Input connector: 1 x PCI-Express 6-pin connector
- Output connectors: 2 x PCI-Express 6-pin connectors
- Cable length: 15 cm.

Slot Bracket with 2 x DB9 Ports

Réf. : 145072

The slot bracket is to be connected to a motherboard or serial RS-232 card. It provides two external
DB9 male connectors.

Main features :
- 2 x HE-10 motherboard connectors
- 2 x DB-9 male connectors
- Cable length: 18 cm

HE-10 Connector Specifications:
2 4 6 8 10 (Pin # 10 poka yoke)
1 3 5 7 9 (Pin # 1 is marked)

Wiring Diagram
HE-10 - DB9 male - Signal
1 1 CD
2 2 RD
3 3 TD
4 4 DTR
5 5 Gnd
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
10 not used

Slot Bracket with 2 x eSATA Ports

Réf. : 145080

Connect this slot bracket to the SATA port of your motherboard or any other SATA controller board. It adds two external eSATA connectors.

Main features:

- 2 x SATA internal connectors
- 2 x eSATA female connectors
- Cable length: 30 cm

Power extension cable for 24-pin ATX motherboard- 20 cm

Réf. : 146815

Can extend the ATX power cable to a 24-pin motherboard.
Ideal for full-size PC cases.

Main features:

- Input connector: 24-pin ATX
- Output connector: 24-pin ATX
- Cable length: 20 cm

SATA to 3 x Molex power cable adapter- 30 cm

Réf. : 147559

This adapter can split the SATA power connector into 3 x 4-pin Molex plugs.
Ideal to connect up to 3 devices over Molex from a single SATA power supply.

Main features :

- Input connector: 1 x SATA male
- Output connector(s): 3 x 4-pin Molex female
- Cable length: 30 cm

SATA to 2 x SATA + Molex power adapter cable- 30 cm

Réf. : 147557

Splits the SATA power connector into 2 SATA power connectors + 1 x 4-pin Molex power connectors.
Ideal to connect 3 devices (HDDs)

Product features:

- Input connector: 1 x SATA male
- Output connectors: 2 x SATA female + 1 x 4-pin Molex female
- Cable length: 30 cm

Data + Power SATA extension cable- 50cm

Réf. : 147500

This extension calbe is 50-cm longer than the standard cables, ideal for HDD connection.
Includes a data and a power supply connectors. Practical for large PC cases.

Product features :

- Input connector: 1x SATA male (power + data)
- Output connector:1x SATA Female (power + data)
- Cable length: 50 cm.

Micro SATA (SSD) to SATA Adapter

Réf. : 146310

Changes the micro SATA SSD connector into SATA connector with power supply. Compatible with Windows,
Mac, Linux operating systems, for which no drivers are needed.

Main features:

- Micro SATA connector on the SSD side
- SATA (Data + Power) connector on the motherboard side
- Without cable.

Motherboard Adapter- 2 x USB2.0 internal ports

Réf. : 307822

This adapter adds 2 x USB2.0 Type A female connectors to your PC case.
Ideal for the following devices installed in a front space:

- USB duplicator
- Memory card reader
- USB wireless adapter; etc...

Product features:

- Input connector: 1 x USB2.0 9-pin DIP
- Output connectors: 2 x USB2.0 Type A female
- Supported data transfer rates: 1.5/ 12/ 480 Mbit/s
- Without cable

Motherboard power adapter cable 20 Pin to 24 Pin

Réf. : 314060

Connection of a 20-pin ATX power supply to a motherboard equipped only with 24-pin ATX connectors.
The wiring diagram complies with the EPS/12V specifications on the 24-pin side and with the ATX 2.x specifications on the 20-pin side.

Product features:

- Input connector: 1 x 20-pin ATX
- Output connector: 1 x 24-pin ATX
- Cable length: 20 cm

Bracket Type-C USB 3.1 Gen2 to Internal USB 3.1

Réf. : 146700

AT to ATX motherboard power adapter cable

Réf. : 147531

Ideal to install an old-generation AT P8/P9 motherboard into an up-to-date PC case

Main features:

- Input connector: 1 x 20-pin ATX
- Output connector: 1 x AT (P8/P9)
- Cable length: 20 cm

Slot Bracket with 2 x USB3.0 Ports

Réf. : 146699

Slot bracket for connection to your motherboard. It provides 2 external USB3.0 ports.
With a 25-cm cable.

Product features:

- Internal connector: 10-pin DIP (2 x 5)
- Bracket connectors: USB3.0 female type A
- Cable length: 25 cm.

Blind Slot Bracket- Bag of 10pcs

Réf. : 740351

Blind slot brackets by 10 pieces.

Slim SATA (CD/DVD) to SATA Adapter

Réf. : 146341

Changes the Slim SATA connector of a slim optical drive (CD/DVD) into a SATA connector with power
supply.
Compatible with Windows, Mac, and Linux operating systems, for which no drivers are required.

Main features:

- Slim SATA connector on the optical drive side
- SATA (data+power) connector on the motherboard side
- Without cable

Otterbox USB C-C cable 1M

Réf. : 766529

SHOKZ USB-C Adapter

Réf. : 778070

M.2 NGFF SATA to 2.5" SATA Adapter

Réf. : 307607

6Gbps SATA III H/W RAID Controller

Product benefits:

- Rapid SSD to SATA conversion
- Natural air flow
- Same size than a 2.5'' SSD
- Can be easily adapted into a PC, laptop
- Transparent for the system
- Hardware-based RAID 1/ SPAN and PM

Main features:

- Converts 2x M.2 NGFF SATA based SSD to a standard 2.5'' 7mm SATA drive
- Supports SATA I, SATA II, SATA III Host port
- Supports 6Gbps, 3Gbps SATA-based M.2 NGFF 80/60/42/30 mm SSD
- M.2 NGFF type 2280-D5-B connector on board
- Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD
- Supports dual-sided SSD module 1.5mm component height on the top and bottom side
- Supports H/W RAID 1, SPAN (Big Drive) and PM (2Drives) Modes
- Does not support PM (2 Drives) Mode if SATA I or no Port Multiplier compatible
- SATA Host connection
- 22-pin SATA (Signals and Power) male connector on board
- 2x M.2 SSD ACT LED
- Transparent to the operating system, no driver required on Windows, Mac and Linux
- Provides Windows and Mac GUI to configure RAID modes and monitor RAID status
- Includes 7mm height 2.5'' drive metal frame with 8 mounting holes and 4 HDD screws
- Compatible with 2.5'' SATA drive dimension : 100.45mm x 69.85mm x 7mm