PoE Accessories

Cat6 RJ45 Patch cable S/FTP LSZH POE snagless grey - 1 m

Réf. : 851310

Specifications:

- Category: 6
- Frequency: 250 MHz
- Impedance: 100 Ohms
- Shielding: aluminum foil on each pair overlaid by a copper braid
- Compatible with the following standards: ANSI/TIA 568C.2 - ISO 11801
- Jacket: LSZH (halogen-free)
- Protective boots covering the locking tab
- Individual packaging
- Guarantee: 20 years
- Designed for PoE applications

Cat6 RJ45 Patch cable S/FTP LSZH POE snagless grey - 2 m

Réf. : 851311

Specifications:

- Category: 6
- Frequency: 250 MHz
- Impedance: 100 Ohms
- Shielding: aluminum foil on each pair overlaid by a copper braid
- Compatible with the following standards: ANSI/TIA 568C.2 - ISO 11801
- Jacket: LSZH (halogen-free)
- Protective boots covering the locking tab
- Individual packaging
- Guarantee: 20 years
- Designed for PoE applications

TP-LINK TL-PoE 10R PoE Splitter

Réf. : 302513

The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter.
Delivers 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix devices such as AP, IP Camera or IP Phone, etc.

Main features:

•IEEE 802.3af compliant
•Selectable power output
•Gigabit speed support
•Plug-and-Play, requires no configuration

TP-LINK TL-PoE 150S PoE Injector

Réf. : 302415

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK+s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Main Features:

•IEEE 802.3af compliant
•Auto-determine the necessary power requirements
•Gigabit speed support
•Plug-and-Play, requires no configuration

5V Output USB-C PoE Splitter

Réf. : 305045

TP-LINK TL-PoE 150S PoE Injector

Réf. : 302416

The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PDs (Powered Devices) or PoE Receiver Adapters, such as TP-LINK+s TL-POE10R, or other equivalent product, to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Main Features:

•IEEE 802.3af compliant
•Auto-determine the necessary power requirements
•Gigabit speed support
•Plug-and-Play, requires no configuration

PoE TESTER UP TO PoE++

Réf. : 045177

The Gigabit LAN tester is an advanced diagnostic tool. Thanks to this tool, the network administrators can rapidly confirm the status of active port.
It can pin-point the problems during LAN installation or during maintenance for LAN device or wall outlets. The tester indicates the followings:

• Auto negociation
• 1000 Base-T Full Duplex
• 100 Base-T Full Duplex
• 100 Base-T Half Duplex
• 10 Base-T Full Duplex
• 10 Base-T Half Duplex

Features:

• Detection of PoE voltage
• PSE device Identification and detection of voltage on the pair 1.2-3.6 (Endspan) or on the pair 4.5-7.8 (Midspan)
• Transmission rate identification on the port up to Gigabit
• 2 x RJ45 connectors (one for Switch/ Hub, the other for Network adapter)
• Port Finder function

Cat6 RJ45 Patch cable S/FTP LSZH POE snagless grey - 5 m

Réf. : 851312

Specifications:

- Category: 6
- Frequency: 250 MHz
- Impedance: 100 Ohms
- Shielding: aluminum foil on each pair overlaid by a copper braid
- Compatible with the following standards: ANSI/TIA 568C.2 - ISO 11801
- Jacket: LSZH (halogen-free)
- Protective boots covering the locking tab
- Individual packaging
- Guarantee: 20 years
- Designed for PoE applications