Fiber converters and chassis - Page 2

PLANET IGT-905A layer II industrial converter RJ45/SFP

Réf. : 314900

The PLANET IGT-905A is a managed Gigabit media converter for professional use that can extend your network to a 10-km distance over fiber optics. The connection distance depends on the SFP transceiver module you insert.
The heavy-duty housing can stand electromagnetic interferences and power surges that often occur in industrial environments.
The managed converter keeps the VLAN Tag integrity, which can be altered by traditional media converters.

Specifications:

- Dual-Speed SFP slot, compatible with SFP Gigabit and 100 FX transceiver modules
- Redundant power supply: 12-48 V DC
- Supported temperature in operation: -30° to +75°C
- IP-30 metal housing
- Alarm relay in case of a power failure
- Ethernet ESD protection: 6 kV
- Compliant with the European requirements regarding drops, impacts and vibrations
- Can be wall-mounted or installed on a DIN rail
- Store-and-Forward architecture
- IEEE802.3x Pause frame Flow Control in Full-Duplex and backpressure in Half-Duplex
- Jumbo frame management up to 9216 bytes
- Loopback detection, storm control
- VLAN management up to 16 groups, 4K IDs/ IEEE802.1Q VLAN Tag
- Supports QoS function
- Bandwidth control on copper / fiber links
- 4 priority lines, Strict Priority, WRR
- IEEE802.1p/ IP DSCP Priority/ IP Address Priority CoS
- IP remote management by web-based interface
- Supports SNMPv1/v2/c & 4 RMON, Event trap and SNMP trap management
- DHCP/ static IP
- TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
- Supports up to 16 TCP/UDP filtering groups
- Firmware update
- RESET button on front panel
- LCD display for temperature status

MEDIA CONVERTER SINGLE MODE 100FX SC+LFP-25KM

Réf. : 311726

ALLIED AT-SPTX MODULE SFP RJ-45 GIGABIT

Réf. : 522796

SWITCH 8 RJ-45 10/100 + 1 FIBER 100FX MULTIMODE SC 2KM

Réf. : 311747

Allied AT-MMC2000/SP media converter 10/100/1000 to sfp

Réf. : 522236

SWITCH 2 GIGA SFP + 2 GIGALAN 10/100/1000

Réf. : 311944

Planet VC-231 ethernet over VDSL2 RJ45/RJ11 30A converter

Réf. : 410233

The PLANET VC-231 is an Ethernet over VDSL2 converter, which operation is based on two network technologies: Ethernet and VDSL2, providing ultra fast data rates over the existing copper telephone
line. As a result, you don+t have to install new cables.
The connection distance can reach up to 100/1000Mbps over 300m and 50/2Mbps over 1.4km for long-
distance lines.

Product features:

- Cost-effective VDSL2 CO/CPE bridge solution
- CO/CPE selectable via DIP Switch
- 17a band plan for the long distance transmission of upstream and downstream signals
- 30a band plan for the short distance transmission of upstream and downstream signals
- Complies with IEEE 802.3, IEEE 802.3u and IEEE 802.3x standards
- DMT (Discrete Multi-Tone) line coding
- Half duplex Back pressure and IEEE 802.3x Full Duplex Pause frame flow control
- Built-in POTS splitter to share voice and data (VC-234 only)
- Voice and data communication can be shared on the existing telephone wire simultaneously
- Hardware IGMP Snooping for Multimedia service (VC-234)
- Support up to 1536 bytes packet size, 802.1Q VLAN tag transparent
- VDSL2 stand-alone transceiver for simple bridge modem application
- Selectable target profile and target SNR margin
- LED indicators for network diagnostic

TL-SM5110-SR 10Gbase-SR SFP+ LC Transceiver 300m

Réf. : 311949

IP30 Industrial Gigabit Media converter PoE++ RJ45/2xSFP

Réf. : 314205

MEDIA CONVERTER MULTIMODE 100FX SC 2 RJ45-2 KM

Réf. : 311753

ALLIED AT-SPFX/2 SFP Optical Module 100FX Multimode 2km

Réf. : 522699

TP-LINK MC112CS WDM Fast Ethernet Media Converter

Réf. : 311922

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK+s media converter MC111CS is just one of the examples to cooperate with MC112CS.

Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber
up to 20 kilometers(12.4 miles).

Main Features:

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards.
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

PLANET XT-955A Media Convert. SFP+ / RJ45 Multi-Gigabit

Réf. : 314925

IP30 Industrial Gigabit Media converter 2x PoE++ RJ45/2x SFP

Réf. : 314202

PLANET XT-905A

Réf. : 314910

Netgear AGM734 sfp to 1000Base-T

Réf. : 315045

HUAWEI FIBER MODULE MULTIMODE MINIGBIC SR 300M

Réf. : 101520

XT-915A 2-Port 10G/1GBASE-X SFP+ Managed Media Converter

Réf. : 314915

PLANET MGB-TSX2 SX SFP Module up to 2KM -45/85°C

Réf. : 411796

GIGABIT SWITCH 10 PORT W/ 8 PORT SFP 1000SX/LX

Réf. : 311848

TP-LINK MC210CS Gigabit Ethernet Media Converter

Réf. : 311925

The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media
or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at
1310nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC210CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 15 kilometers(9.3 miles).

•Complies with IEEE 802.3ab and IEEE 802.3z
•Provides switch configuration of Force /Auto transfer mode for FX port
•Extends fiber distance up to 15km(9.3 miles)

TP-LINK MC200CM Gigabit Ethernet Media Converter

Réf. : 311915

The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or
vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is compatible with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´system chassis, Auto MDI/MDI-X for TX port, and front panel status LEDs. The MC200CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 0.55 kilometers(0.342 miles).

•Complies with IEEE 802.3ab and IEEE 802.3z
•Provides switch configuration of Force /Auto transfer mode for FX port
•Extends fiber distance up to 0.55km(0.342 miles)

Mini Media Converter 10/100/1000T to 1000BASE-SX MM, SC Connector

Réf. : 522212

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311921

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

NETGEAR AGM731F

Réf. : 315100