Fiber converters and chassis

Web Manageable 1000Base-TX to SFP 100/1G

Réf. : 411915

Dexlan 10/100 sfp 100FX port media converter

Réf. : 311690

This media converter is equipped with an STP RJ-45 port with auto-negotiation function and an SFP slot. You can adapt the media converter depending on your network, by inserting a MiniGBiC module (not included) for single-mode or multimode link implementation.
Depending on the transceiver, the transmission distance can reach up to 2km in multimode fiber and up to 10km in single-mode fiber.

Specifications:

- Compatible with IEEE802.3 and IEEE802.3u standards
- Data transfer rate up to 100Mbps in Full Duplex mode on the fiber and copper ports
- Auto-negotiation and Auto MDI/MDI-X functions supported by the RJ-45 port
- Compatible with IEEE802.1Q VLAN Tag and Spanning Tree protocols
- SFP slot for 100FX multimode or single-mode transceiver insertion, hot swappable
- 4 DIP switches for speed override and Link Fault Pass-through function setup

ALLIED AT-SPTX MODULE SFP RJ-45 GIGABIT

Réf. : 522796

Netgear AGM734 sfp to 1000Base-T

Réf. : 315045

NETGEAR AGM731F

Réf. : 315100

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311903

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311904

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber