Fiber transceiver modules - Page 2

HUAWEI FIBER MODULE 9,8G SINGLEMODE MINIGBIC LR 1,4km

Réf. : 101525

SFP+ 10G SR compatible Cisco SMB/Catalyst

Réf. : 311774

SFP 1000SX Compatible Aruba HP J4858D

Réf. : 311761

SFP 1000LX Compatible Aruba HP J4859D

Réf. : 311762

SFP 1000SX compatible Cisco Catalyst

Réf. : 311771

SFP 1000SX compatible Cisco SMB Series

Réf. : 311773

SFP 1000LX compatible Cisco SMB Series

Réf. : 311775

SFP+ 10G LR compatible Cisco SMB/Catalyst

Réf. : 311776

DAC SFP+ 10G 5m compatible Cisco SMB/Catalyst

Réf. : 311777

DAC SFP+ 10G 1m compatible Cisco SMB/Catalyst

Réf. : 311778

DAC SFP+ 10G 3m compatible Cisco SMB/Catalyst

Réf. : 311779

SFP 1000LX compatible Cisco Catalyst

Réf. : 311780

FiberTransceiver module Single Mode MiniGBiC 1000 LX -10 km

Réf. : 311795

Bidirectional long-distance fiber module for Ethernet switch equipped with SFP ports.
The digital diagnostic monitoring interface for optical transceivers allows real-time access to
the device's operating parameters.

Product features:

- Duplex Single mode fiber port with LC connectors
- Gigabit link up to a 10-km distance over single mode 9/125µm
- Compliant with the IEEE802.3z Gigabit standard
- Wavelength: PP 1310nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- MSA-compatible
- Hot-swappable
- Digital Diagnostic Monitoring technology
- SFP-compatible (Small Form Factor Pluggable): 55.5 x 13.5 x 8.5mm
- Class 1-compatible Laser product, compliant with the EN 60825-1 standard.

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 311799

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

10GBase-LR sfp+ module singlemode 10kms + ddm

Réf. : 311825

This bidirectional expansion module was designed for Gigabit Ethernet switches equipped with SFP+ slots. The module supports Digital Diagnostic function, based on the SFF-8472 industrial standard. This function allows the device to receive real-time information (input/output signals, laser temperature...)

Product features:

- Fiber optic port: Duplex single-mode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 10 km over 9/125µm (OS1 5km/OS2 10km)
- Compatible with the following standards: IEEE802.3ae 10GBASE-LR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function: SFF8472 Rev.9.2
- Wavelength: 1310nm
- Data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with Multi-Source-Agreement (MSA)
- Hot-swappable
- Compliant with SFP form factor: 57 x 13.3 x 8.5 mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 260136

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

ALLIED TELESIS AT-SPLX10/I

Réf. : 746349

ALLIED TELESIS AT-SPLX40

Réf. : 746348

AT-SP10LRA/I SFP+ - 1 x LC 10GBase-LR

Réf. : 522941

ALLIED AT-QSFP28-1CU DAC 1m

Réf. : 522937

SFP+ Pluggable Optical Module, 10G-LRM, 220m/550m, Multi mode, Dual fiber [Tx=13

Réf. : 522891

SFP+ Pluggable Optical Module, 10G-SR, 300m, Multi mode, Dual fiber [Tx=850,Rx=8

Réf. : 522890

SFP+ Direct attach cable, Twinax, 7m (0 to 70øC)

Réf. : 522848

SFP+ Direct attach cable, Twinax, 3m (0 to 70øC)

Réf. : 522847