Fiber transceiver modules - Page 3

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 311799

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

10GBase-LR sfp+ module singlemode 10kms + ddm

Réf. : 311825

This bidirectional expansion module was designed for Gigabit Ethernet switches equipped with SFP+ slots. The module supports Digital Diagnostic function, based on the SFF-8472 industrial standard. This function allows the device to receive real-time information (input/output signals, laser temperature...)

Product features:

- Fiber optic port: Duplex single-mode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 10 km over 9/125µm (OS1 5km/OS2 10km)
- Compatible with the following standards: IEEE802.3ae 10GBASE-LR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function: SFF8472 Rev.9.2
- Wavelength: 1310nm
- Data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with Multi-Source-Agreement (MSA)
- Hot-swappable
- Compliant with SFP form factor: 57 x 13.3 x 8.5 mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

TP LINK TL SM311LS Mini GBiC Module- Single Mode LC

Réf. : 311895

TP LINK TL SM311M Mini GBiC Module- Multimode LC

Réf. : 311899

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311906

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

NETGEAR AX743

Réf. : 315010

NETGEAR AXM761

Réf. : 315011

NETGEAR AXM762

Réf. : 315012

NETGEAR AXM763

Réf. : 315013

NETGEAR AGM732F

Réf. : 315110

PLANET MFB-RF20 SFP 100FX Single Mode Transceiver- 20 km

Réf. : 411675

This SFP transceiver module is very resistant. It can be used within -40 to 75°C temperature range.

Specifications:

- LC Duplex connector
- Compatible with IEEE802.3u 100Base-FX @125Mbps
- Maximum transmission distance: 20 km over single mode fiber (9/125µm, OS1/OS2)
- Wavelength: 1310nm - 125Mbps
- Operating temperature : -40 to +75°C
- Can be installed outdoors, since it is protected by a housing

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Réf. : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

PLANET MFB-F20 SFP 100 FX SFP Transceiver Single Mode 20 km

Réf. : 411695

This series of SFP modules was designed for single-mode fiber links. The modules are hot-swappable, according to the Multisource Agreement (MSA) standards, they are hot-swappable
The modules operate at 1310nm and can transmit to 20 km over 9/125µm single-mode fiber.

Product features:

- Signal: 100FX single-mode/ 1310nm @ 20 km
- Supported temperature in operation: 0-50°C
- Compatible with 9/125µm fiber