Switches

PLANET Industrial Switch 10/100- 5 Ports

Réf. : 314705

PLANET ISW-501T switch
5-port industrial network switch, 10/100Mbps. Can be installed in a warehouse, manufacture, or any production site or even outdoors.
It is a very sturdy device with a waterproof housing (IP30). Can operate in extreme temperatures.
Compliant with Class I division II

Specifications:

- 5 x 10/100Mbps ports
- Backplane: 1Gbps
- Powered by 6-pin terminal block with dual input (redundant with alarm)
- Voltage: 12 to 48V DC
- Power : 11 Watts
- Aluminum housing (IP30)
- Operation temperature: -40°C to +75°C
- Installation : DIN rail 35/ fixing plate
- Dimensions: 135x87x32mm - 438g

PLANET Industrial Switch- 4 x 10/100 + 2 x 100FX SC MM- 2 km

Réf. : 314706

This fiber media converter has 2 fiber ports and a 4-port embedded copper switch.
You can expand your network by cascading the converters up to 2 km.

The heavy-duty design makes this converter ideal for rough environments. It supports
extreme temperatures.

Product features:

- 4 x 100Mbps RJ-45 auto-MDIx ports
- 2 x 100FX duplex SC fiber ports
- Fiber optic signal: 100FX 1310nm
- Compatible with Multimode 50/125µm / 62.5/125µm (2km max) fiber
- RJ-45 copper transmission: 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber optics transmission: 200Mbps in Full-Duplex
- Protection index: IP30
- Supported temperature ranges: -40° to +75° / 5 à 90% humidity rate
- Two installation modes: DIN rail or wall-mounted
- Power supply: 2 x 48V with alarm output
- Protection: Ethernet 6KV DC / Power supply 6KV DC / Reversed polarity
- Dimensions : 135 x 97 x 32 mm - 442gr

PLANET Industrial Switch 10/100- 8 Ports

Réf. : 314708

PLANET ISW-801T switch
8 x 10/100Mbps industrial switch. It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 8 x 10/100Mbps ports
- Backplane: 1.6Gbps
- Can be powered by 6-pin terminal block (redundant with alarm)
- Voltage: 12 - 48V DC
- Power: 11,6 Watts
- IP30-rated aluminum housing
- Operation temperature : -40°C to +75°C
- Installation : by 35-DIN rail / fixing plate
- Dimensions: 135x87x32mm - 454g


It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 4 x 100Mbps Auto-MDiX RJ-45 ports
- 2 x 100FX Duplex SC fiber ports
- Fiber signal : 100FX 1310nm
- Operation : Multimode 50/125µm / 62.5/125µm (2km max)
- Twisted pair transmission over RJ45 ports : 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber transmission : 200Mbps in Full-Duplex
- IP30-rated
- Operation temperature : -40° to +75°
- Humididy supported: 5 to 90%
- 2 fixing kits included: Wallmount installation or 35-mm DIN rail installation
- Can be powered by terminal block: 2 x 12 - 48V inputs/ alarm output
- Protection : Ethernet 6KV DC / Alimentation 6KV DC / Reversed polarity
- Power consumption : 16 watts max
- Dimensions : 135 x 97 x 32 mm - 438g

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314805

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

PLANET IGS-801T Industrial Gigabit Switch- 8 Ports

Réf. : 314808

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

PLANET IP30 Outdoor PoE Splitter 12/24V -40/75°

Réf. : 314702

Industrial IEEE802.3at Gigabit High Power over Ethernet Splitter

- IP-30 metal case protection
- Din Rail and Wallmount design
- Supports 6000VDC EFT protection on the power line
- Supports 6000 VDC Ethernet ESD protection
- Complies with IEEE802.3at PoE powered devices
- Splits the 48~56 V DC power over RJ-45 Ethernet cable into DC 12V/24V output
- Auto detection of PoE IEEE802.3at equipment protects devices from being damaged by incorrect installation
- Adjustable output voltage options (12V/ 2A, 24V/ 1A) to fit various devices
- 2-Port RJ-45 interfaces:
1-port PoE Power + Data input
1-port Data output
- 2 DC out (4-pin terminal block)

PLANET Industrial Switch PoE 10/100 - 5 Ports

Réf. : 314704

4-port PoE 802.3af industrial switch
Copper or Optical fiber input connector
Active PoE switch for the self-powering of 4 x devices over RJ-45 port up to a 100-meter distance
Can stand -45° to 75°C temperature conditions, outdoor installation.
On the network input, the maximum distance will be of 100 m over copper connection.
- Network input: RJ-45
- Compatible with PoE PoE 802.3af 15.4w (pin 1,2,3,6)
- Mounting kit for DIN rail or wallmount installation
- 24/ 48V power supply / PoE 48V

PLANET Industrial Switch 4Ports PoE 10/100+SFP 100FX

Réf. : 314715

The PLANET ISW-514PTF is an industrial switch with 4 x PoE ports and 1 SFP port.

Product features:

- Supplies the power to 4 devices over RJ-45 cable
- Connection distance: 100 m
- Supports a wide range of temperatures from -45°C to +75°C
- Can be installed outdoors
- LAN input port : SFP 100FX slot
- Compatible with the following standards: PoE 802.3af 15,4w (End-Span pin 1,2,3,6)
- Can be installed on DIN rail or wall-mounted
- Power supply: 24 V or 48 V
- Output power: PoE 48 V

INDUSTRIAL FAST ETHERNET SWITCH 4 X 10/100 + 2 X SFP

Réf. : 314742

Fast Ethernet Switch with non-blocking wire-speed performance and new slim type with IP-30 metal shape for easily deployment in Heavy Industrial demanding environments.
With 1 / 1.2Gbps internal switching fabric, the Industrial Fast Ethernet Switch can handle extremely
large amounts of data in a secure topology linking to a backbone or high capacity servers.
The Industrial Fast Ethernet Switch has 2K MAC address table and offers wire-speed packets transfer performance without risk of packet loss. The stable throughput of the device makes it ideal for most
Ethernet environments.

Specifications:

- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX standards
- 4 x RJ-45 10/100 ports
- 2 x SFP 100 FX ports
- Supported temperature in operation: -40° / +75° C
- 12-48V DC redundant power with polarity reverse function
- Housing : IP30 aluminum (resists to vibrations and drops)
- Includes a DIN rail mounting kit
- Dimensions: 135 x 97 x 32 mm
- Weight : 442 g

IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Réf. : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

PLANET IGS-624HPT Industrial Switch 4x Giga PoE+2 SFP Ports

Réf. : 314862

The PLANET IGS-624HPT is an Industrial Gigabit 802.3at PoE+ Switch providing non-blocking wire-speed
performance and great flexibility for Gigabit Ethernet extension in harsh industrial environment.
It provides 4-port 10/100/1000Base-T copper with 802.3af/at PoE injector and 2 extra 100/1000Base-X SFP fiber optic interfaces delivered in an IP30 rugged strong case with redundant power system.
The IGS-624HPT is well suited for applications in deploying surveillance system, and securing control and wireless service in climatically demanding environments with wide temperature range from
-40 to 75 degrees C.
To fulfill the demand of High Power PoE for network applications, the IGS-624HPT provides 4 10/100/1000Mbps ports featuring both IEEE 802.3af and IEEE 802.3at Power over Ethernet Plus (PoE+) that combine up to 30-watt of power output and data per port over one Cat.5E / 6 Ethernet cable.
With totally 120-watt PoE output capability on the whole system, the IGS-624HPT is designed specifically to satisfy the growing demand of higher power consuming network PD (powered devices) such as PTZ (Pan, Tilt & Zoom) / Speed Dome network cameras, multi-channel (802.11a / b / g / n) outdoor wireless LAN access points and other PoE network devices by providing double PoE power, rather than the current conventional 802.3af PoE.
The IGS-624HPT Industrial Gigabit PoE+ Switch provides rapid fiber redundancy of link for highly critical Ethernet applications. The redundant-mode supports auto-recover function. If the destination port of a packet is link down, it forwards the packet to the other port of the backup pair.

Industrial 802.3at (30W) high power poe injector

Réf. : 314162

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender

Réf. : 410174

The IPOE-E174 PoE switch has an IP-30 protection index. The components can stand extreme temperatures that can be found in storage and production facilities, from -40°C to +75°C
Moreover, the switch can be installed outdoors if protected by a weatherproof housing.

The switch operates with a 30-W Gigabit PoE+ injector. In this configuration, the automatic PoE management will provide the power to only 2 x PoE 802.3af devices.
You can as well build up an up to 200-meter link by placing the switch in the middle (100 meters upstream/ 100 meters downstream).

Product benefits:

- 1 x RJ-45 Gigabit Ultra PoE input, 60W max.
- 4 x RJ-45 Gigabit PoE+ outputs, 30W max.
- PoE power usage LED indicator (25%, 50%, 75%)
- Extreme heat/ cold operation temperature range: -40~75°C
- Automatically detects the connected powered devices (PD)
- Long-distance link: 100 meters upstream and 100 meters downstream from the switch

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314515

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

Industrial 802.3at (30W) high power poe injector

Réf. : 410176

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

6-Port Gigabit Switch with 4-Port PoE++ 95W & 2 SFP 100/1G

Réf. : 314824