Switches

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314805

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

PLANET IGS-501T Industrial Gigabit Switch- 5 Ports

Réf. : 314515

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

IP30 Industrial 4-Port 10/100/1000T + 2-Port 100/1000X SFP

Réf. : 314842

Specifications:

. 4-Port 10/100/1000Base-T RJ-45 with auto MDI / MDI-X function
. 2 SFP interfaces, 100/1000Base-X dual mode (DIP switch control)
. IEEE 802.3 / 802.3u / 802.3ab / 802.3z Ethernet Standard Compliant
. Supports Auto-negotiation and 10/100Mbps half / full duplex and 1000Mbps full duplex mode
. High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets
. Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
. 9K Jumbo Frame Size support
. Backplane (Switching Fabric): 12Gbps
. Integrated address look-up engine, support 1K absolute MAC addresses
. Automatic address learning and address aging
. CSMA/CD Protocol
. Slim IP30 metal case / protection
. DIN Rail and Wall Mount Design
. 12 to 48V DC redundant power with polarity reverse protect function
. -40 to 75 degrees C operating temperature

PLANET Industrial Switch- 4 x 10/100 + 2 x 100FX SC MM- 2 km

Réf. : 314706

This fiber media converter has 2 fiber ports and a 4-port embedded copper switch.
You can expand your network by cascading the converters up to 2 km.

The heavy-duty design makes this converter ideal for rough environments. It supports
extreme temperatures.

Product features:

- 4 x 100Mbps RJ-45 auto-MDIx ports
- 2 x 100FX duplex SC fiber ports
- Fiber optic signal: 100FX 1310nm
- Compatible with Multimode 50/125µm / 62.5/125µm (2km max) fiber
- RJ-45 copper transmission: 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber optics transmission: 200Mbps in Full-Duplex
- Protection index: IP30
- Supported temperature ranges: -40° to +75° / 5 à 90% humidity rate
- Two installation modes: DIN rail or wall-mounted
- Power supply: 2 x 48V with alarm output
- Protection: Ethernet 6KV DC / Power supply 6KV DC / Reversed polarity
- Dimensions : 135 x 97 x 32 mm - 442gr

24-Port Layer 2 Managed Gigabit Ethernet Switch W/2 SFP

Réf. : 411026

16-Port Layer 2 Managed Gigabit Ethernet Switch W/2 SFP

Réf. : 411016

INDUSTRIAL FAST ETHERNET SWITCH 4 X 10/100 + 2 X SFP

Réf. : 314742

Fast Ethernet Switch with non-blocking wire-speed performance and new slim type with IP-30 metal shape for easily deployment in Heavy Industrial demanding environments.
With 1 / 1.2Gbps internal switching fabric, the Industrial Fast Ethernet Switch can handle extremely
large amounts of data in a secure topology linking to a backbone or high capacity servers.
The Industrial Fast Ethernet Switch has 2K MAC address table and offers wire-speed packets transfer performance without risk of packet loss. The stable throughput of the device makes it ideal for most
Ethernet environments.

Specifications:

- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX standards
- 4 x RJ-45 10/100 ports
- 2 x SFP 100 FX ports
- Supported temperature in operation: -40° / +75° C
- 12-48V DC redundant power with polarity reverse function
- Housing : IP30 aluminum (resists to vibrations and drops)
- Includes a DIN rail mounting kit
- Dimensions: 135 x 97 x 32 mm
- Weight : 442 g

8-Port Web/Smart 1000Base-T w/2-Port SFP Gigabit Switch

Réf. : 411082

This Layer 2 Gigabit switch can be installed in a 10'' wallmount cabinet. The high-performing network
switch is equipped with 2 SFP fiber ports, on which you can plug the following transceivers:

- 100 FX
- mini GBiC 1000 SX/LX

Specifications:

- 8 x 10/100/1000Mbps ports + 2 SFP combo slots
- Layer 2 functions: 802.1Q VLAN/ Private VLAN/ Q-in-S/ IGMP v1v2v3 and Spanning 1D/1w
- QoS: 8 levels per port and per VLAN
- Backplane: 20 Gbps

PLANET IGT-905A layer II industrial converter RJ45/SFP

Réf. : 314900

The PLANET IGT-905A is a managed Gigabit media converter for professional use that can extend your network to a 10-km distance over fiber optics. The connection distance depends on the SFP transceiver module you insert.
The heavy-duty housing can stand electromagnetic interferences and power surges that often occur in industrial environments.
The managed converter keeps the VLAN Tag integrity, which can be altered by traditional media converters.

Specifications:

- Dual-Speed SFP slot, compatible with SFP Gigabit and 100 FX transceiver modules
- Redundant power supply: 12-48 V DC
- Supported temperature in operation: -30° to +75°C
- IP-30 metal housing
- Alarm relay in case of a power failure
- Ethernet ESD protection: 6 kV
- Compliant with the European requirements regarding drops, impacts and vibrations
- Can be wall-mounted or installed on a DIN rail
- Store-and-Forward architecture
- IEEE802.3x Pause frame Flow Control in Full-Duplex and backpressure in Half-Duplex
- Jumbo frame management up to 9216 bytes
- Loopback detection, storm control
- VLAN management up to 16 groups, 4K IDs/ IEEE802.1Q VLAN Tag
- Supports QoS function
- Bandwidth control on copper / fiber links
- 4 priority lines, Strict Priority, WRR
- IEEE802.1p/ IP DSCP Priority/ IP Address Priority CoS
- IP remote management by web-based interface
- Supports SNMPv1/v2/c & 4 RMON, Event trap and SNMP trap management
- DHCP/ static IP
- TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
- Supports up to 16 TCP/UDP filtering groups
- Firmware update
- RESET button on front panel
- LCD display for temperature status

PLANET WGS-5225-8T2SV Industrial Giga Switch 8 GIGA + 2 SFP

Réf. : 314830

The PLANET WGS-4215 8P2S is a new-generation PoE+ industrial switch. The housing is flat and has magnets allowing wall mounting or DIN Rail mounting. These flat switches are designed to save some valuable space in industrial environments.
The 8 PoE+ ports can supply 200 Watts of power over Ethernet cable and the combination of copper and
fiber connection even for long-distances.

Product features :

- 8 x RJ-45 Gigabit PoE+ 30W ports
- 2 x SFP dual-speed 100FX / 1000SX-LX-BX ports
- Layer 2 functions: VLAN, IGMP, QoS, Spanning Tree
- Supported temperature: -40° / +75°C
- Two power supply modes: 5.5/2.1 and 3-wire terminal block
- Input power : 48-56 volts DC
- Dimensions 178 x 134 x 25 mm

Industrial 8-Port Wall-mounted Gigabit switch

Réf. : 314811

PLANET IXT-705AT Indust. STP+ 10G to Copper 10G/5G/2,5G/1G

Réf. : 314905

PLANET Industrial Switch 10/100- 8 Ports

Réf. : 314708

PLANET ISW-801T switch
8 x 10/100Mbps industrial switch. It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 8 x 10/100Mbps ports
- Backplane: 1.6Gbps
- Can be powered by 6-pin terminal block (redundant with alarm)
- Voltage: 12 - 48V DC
- Power: 11,6 Watts
- IP30-rated aluminum housing
- Operation temperature : -40°C to +75°C
- Installation : by 35-DIN rail / fixing plate
- Dimensions: 135x87x32mm - 454g


It is a very sturdy device which can be used in industrial environments and outdoors. It will operate in extreme temperatures.

Specifications :
- 4 x 100Mbps Auto-MDiX RJ-45 ports
- 2 x 100FX Duplex SC fiber ports
- Fiber signal : 100FX 1310nm
- Operation : Multimode 50/125µm / 62.5/125µm (2km max)
- Twisted pair transmission over RJ45 ports : 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber transmission : 200Mbps in Full-Duplex
- IP30-rated
- Operation temperature : -40° to +75°
- Humididy supported: 5 to 90%
- 2 fixing kits included: Wallmount installation or 35-mm DIN rail installation
- Can be powered by terminal block: 2 x 12 - 48V inputs/ alarm output
- Protection : Ethernet 6KV DC / Alimentation 6KV DC / Reversed polarity
- Power consumption : 16 watts max
- Dimensions : 135 x 97 x 32 mm - 438g

INDUSTRIAL MEDIA CONVERTOR RJ45/100FX MultiMode SC -2Km

Réf. : 314701

100FX / RJ-45 media converter designed to extend your network up to a 2-km distance outdoors or in industrial environment.
The broad operation temperature range can operate in any weather.

Specifications:
- 1 x RJ-45 100Mbps port
- 1 x Fiber Multimode Duplex 100FX SC connector
- 2 fixing kits for wall mount or DIN rail installation

PLANET IGS-801T Industrial Gigabit Switch- 8 Ports

Réf. : 314808

This industrial 5-port 10/100/1000Mbps Ethernet switch can be installed in a workshop, warehouse, and any production unit.
The switch is IP-30 rated and can be operated in extreme temperatures (-40°C to +75°C).
Compliant with the Class I Division 2 classification, it can be operated in the most difficult environments.

Specifications :

- 5 x 10/100/1000 Mbits ports
- Backplane : 10Gbps
- Jumbo Frame management : up to 9k
- Can be powered by a 6-pin redundant terminal block with alarm system
- Power : 12 to 48V DC
- Maximum power: 11 Watts
- Aluminium case, IP30-rated
- Operating temperature: -40°C to +75°C
- Can be installed on a Din Rail or by a wall plate
- Dimensions: 135x87x32mm
- Weight: 498g

Planet ISW-500T switch indust. 5P 10/100 compact -40/+75°

Réf. : 314505

PLANET Industrial Switch 10/100- 5 Ports

Réf. : 314705

PLANET ISW-501T switch
5-port industrial network switch, 10/100Mbps. Can be installed in a warehouse, manufacture, or any production site or even outdoors.
It is a very sturdy device with a waterproof housing (IP30). Can operate in extreme temperatures.
Compliant with Class I division II

Specifications:

- 5 x 10/100Mbps ports
- Backplane: 1Gbps
- Powered by 6-pin terminal block with dual input (redundant with alarm)
- Voltage: 12 to 48V DC
- Power : 11 Watts
- Aluminum housing (IP30)
- Operation temperature: -40°C to +75°C
- Installation : DIN rail 35/ fixing plate
- Dimensions: 135x87x32mm - 438g

Planet ISW-800T switch indust. 8P 10/100 compact -40/+75°

Réf. : 314508

IP30 Indust. SW L2 8-Port Gigabit + 2-Port 100/1000X SFP

Réf. : 314882

Combo fiber 100 FX & Gigabit port !
You can manage multiple high speed video flows and setup long-distance links over optical ports.

Specifications :

- 2 x SFP 100 FX & 1000 SX/LX Ports
- 8 x RJ-45 Gigabit Ports
- Layer 2 functions : VLAN - IGMP - Spanning tree - QoS - Link Aggregation - Bandwitch Control - Port Mirror
- Backplane : 20 Gbps
- 12 - 48 V DC redundant power with polarity reverse function
- Optional Electric Charger
- Management: Web, Telnet, SNMP v1/v2
- ESD protection over Ethernet connection
- IP30 aluminum case (resists to vibrations and drops)
- Operation temperature : -40°C to +75°C
- Includes the kit for DIN rail mounting
- Dimensions: 87.8 x 135 x 56 mm - 720 g

PLANET IGS-5225-4T2S SW.INDUST L2 8 GIGABIT + 2 SFP 100FX/1G

Réf. : 314832

Combo fiber 100 FX & Gigabit port !
You can manage multiple high speed video flows and setup long-distance links over optical ports.

Specifications :

- 2 x SFP 100 FX & 1000 SX/LX Ports
- 8 x RJ-45 Gigabit Ports
- Layer 2 functions : VLAN - IGMP - Spanning tree - QoS - Link Aggregation - Bandwitch Control - Port Mirror
- Backplane : 20 Gbps
- 12 - 48 V DC redundant power with polarity reverse function
- Optional Electric Charger
- Management: Web, Telnet, SNMP v1/v2
- ESD protection over Ethernet connection
- IP30 aluminum case (resists to vibrations and drops)
- Operation temperature : -40°C to +75°C
- Includes the kit for DIN rail mounting
- Dimensions: 87.8 x 135 x 56 mm - 720 g

PLANET IGS-510TF Switch Indust. 4p Gigabit & 1 SFP 100/1G

Réf. : 314841