Fiber converters and chassis - Page 3

GIGABIT 10/100/1000 TO SFP PORT MEDIA CONVERTER

Réf. : 311791

FIBER CONVERTER- GIGABIT MULTI TO SINGLE SC Duplex

Réf. : 311878

DUAL SPEED MEDIA CONVERTER 2 X SFP 1000M PORTS

Réf. : 311882

10/100/1000 to 1000SX Media conv. MultiMode Duplex SC 550m

Réf. : 311756

MEDIA CONVERTER MULTIMODE 100FX SC 2 RJ45-2 KM

Réf. : 311753

SWITCH 4 RJ45 10/100 + FIBER 100FX MULTIMODE SC 2KM

Réf. : 311746

MEDIA CONVERTER SINGLE MODE 100FX SC+LFP-25KM

Réf. : 311726

10/100/1000 to 1000LX Media conv. W/SFP SingleMode 20KM LC

Réf. : 311722

10/100/1000 to 1000LX Media conv. SingleMode 20KM SC

Réf. : 311721

Media converter Fast Ethernet to 100FX SC Multimode 2KC

Réf. : 311703

10/100 SFP 100FX PORT MEDIA CONVERTER

Réf. : 311691

HUAWEI FIBER MODULE MULTIMODE MINIGBIC SR 300M

Réf. : 101520

Netgear AGM734 sfp to 1000Base-T

Réf. : 315045

NETGEAR AGM731F

Réf. : 315100

PLANET GT-1205A Gigabit Media Converter-1 x RJ45/ 2 x SFP

Réf. : 411205

Connect the Gigabit optical bridge and extend your network over long distance. Each bridge has an RJ-45 port for the connection of a high-speed Ethernet device and two SFP ports for the connection of MiniGBiC modules.

Specifications:
- 1 x 10/100/1000Mbps Auto-MDIX RJ-45 port
- 2 x SFP ports for MiniGBiC modules
- Supports the following modules: 1000SX & 1000LX
- External power supply: 5V/2A

IP30 Industrial Gigabit Media converter 2x PoE++ RJ45/2x SFP

Réf. : 314202

PLANET Industrial Switch- 4 x 10/100 + 2 x 100FX SC MM- 2 km

Réf. : 314706

This fiber media converter has 2 fiber ports and a 4-port embedded copper switch.
You can expand your network by cascading the converters up to 2 km.

The heavy-duty design makes this converter ideal for rough environments. It supports
extreme temperatures.

Product features:

- 4 x 100Mbps RJ-45 auto-MDIx ports
- 2 x 100FX duplex SC fiber ports
- Fiber optic signal: 100FX 1310nm
- Compatible with Multimode 50/125µm / 62.5/125µm (2km max) fiber
- RJ-45 copper transmission: 10/20Mbps in Half/Full-Duplex, 100/200Mbps in Half/Full Duplex
- Fiber optics transmission: 200Mbps in Full-Duplex
- Protection index: IP30
- Supported temperature ranges: -40° to +75° / 5 à 90% humidity rate
- Two installation modes: DIN rail or wall-mounted
- Power supply: 2 x 48V with alarm output
- Protection: Ethernet 6KV DC / Power supply 6KV DC / Reversed polarity
- Dimensions : 135 x 97 x 32 mm - 442gr

PLANET XT-705A MEDIA CONVERT. 10G/5G/2.5G/1G/100 - SFP+ 10G

Réf. : 411005

PLANET MC-1500 19" Media Converter Chassis- 15 Slots

Réf. : 411400

Fiber-optic wiring/ Media conversion center
With up to 15-bay, this high-density media chassis can simply be a conversion center of your fiber-optic network, or a network with the demand of multiple media interfaces, in a cost-effective way.
Providing more capacity to the converters in one chassis, the PLANET MC-1500 provides 15-slot in the
19''-rack saving more spaces for fiber-optic wiring yet ease the maintenance of media conversion.
The PLANET MC-1500, media chassis allows the connectivity of up to fifteen PLANET Ethernet/ Fast Ethernet Gigabit Ethernet Converter in one chassis.
Two fans with LED indicators for the system cooling and keep you informed in the system and FAN status.
Independent power supply in each bay of the MC 1500, you can freely install the converters without interrupting the rest of the networks. Moreover, each bay of the media center can deploy to PLANET's
converter family like Ethernet, Fast Ethernet twisted pair to Fiber-optic conversion, Gigabit SX to LX conversion, etc.

Specifications :
- Slot : 15 open slot; 27 x 95 x 71 mm (W x D x H)
- Dimension : (W x H x D) 440 mm x 103 mm x 180 mm, 2.4U height
- Power Requirement : 100-240V AC, 1.8A, 50/60Hz
- Power output : +5V DC per slot, 1 A minimum
- DC Output : +5VDC (+/-1%) per slot
- LED indicators : 3, Power, Fan A, Fan B (On: operating; Off: device or fan fail)
- Environment Temperature : 0~50 Degree C (operating); -20~70 Degree C (storage) Humidity: 0~90% (non-condensing)

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Réf. : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

PLANET FT-802S15 100FX Single Mode Media Converter- 15 km

Réf. : 411705

The PLANET FT-80x is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses SC connectors. Operation distance up to 15 km over single mode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem on the link and provide efficient solutions to monitoring the net. The DIP switch allows you to disable/enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators.

- 10/100Base-TX to 100Base-FX SC Bridge Media Converter - 15km
- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standard
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568/ One fiber-optic, 1310nm wavelength
Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

PLANET MGB-TSX2 SX SFP Module up to 2KM -45/85°C

Réf. : 411796

PLANET GT-802 Gigabit 1000SX Media Converter

Réf. : 411802

Key features:

- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
- TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
- 1000Base-SX: 50/125µm or 62.5/125µm multi-mode fiber cable, up to 220/550m (GT-802).
- Layer 2 key Feature
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminates the loss of packets
- Supports auto MDI/MDI-X function
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
- Media conversion between 10/100/1000Base-T and 1000Base-SX/LX.
- Wallmounting design
- LED indicators for easy network diagnostic
- LFP function available by DIP Switch
- Supports jumbo frames up to 9k
- Compact size, easy installation

PLANET GT-805A Gigabit SFP Media Converter

Réf. : 411805

The PLANET GT-805A is a Gigabit Ethernet converter: 10/100/1000Base-T to 1000Base-SX/LX. It is equipped with 1 x SFP slot for fiber transceiver module insertion and 1 x RJ-45 port with auto negotiation and MDI/MDI-X functions.
The converter supports LFP control (Link Fault Pass-through) so that the administrator will be informed in case of a problem occurring on the link (Link Loss Carry Forward & Link Loss Return).

Specifications:

- 1 x RJ-45 10/100/1000Mbps port
- 1 x SFP slot for fiber module insertion
- Connection distance: 62.5/125µm in multimode fiber up to 220m & 50/125µm in single-mode fiber up to 550m.
- External power supply: 110/230V- 5V/2A
- Compatible with MC1500/MC700 rackmount chassis from PLANET
- Power consumption: 5.6 Watts
- Dimensions: 97 x 70 x 26mm

PLANET GTP-805A Gigabit PoE Converter 802,3af-SFP

Réf. : 411815

High-speed fiber to copper gigabit converter with 30W PoE+ injector: The converter is ideal for IP cameras or Wi-Fi dual-band hot-spots remote installation.

Specifications:

- On the fiber side: 550nm for multimode and 10 km for single mode link
- On the copper side: self-powered Data+Power 1000Mbps over 100 m.
- PoE+ IEEE802.3af/at active injector (PSE 30W)
- Compatible with Class ¾ IP PoE cameras
- Fiber optic port: SFP slot for MiniGBiC module insertion (1000SX or 1000LX)
- RJ-45 Port: 10/100/1000 with Auto MDI/MDI-X function/ MidSpan PoE 4/5(+), 7/8(-)
- External power supply included: 110/230V-52V DC 0.58A
- Dimensions: 26 x 70 x 94mm
- Weight: 210g