Screen mounts

DACOMEX Desk mount - 2 monitors D27-100CG-2, clamp and grommet base

Réf. : 903038

This desktop stand is designed for 2 screens (13-27'')
It is available with two different fixing systems:
- Clip
- Fixed

You can then pick the most appropriate system for your desk.

Specifications:

- VESA: 75 x 75 & 100 x 100
- Adjustable height: up to 400 mm
- Vertical adjustment: +/-45°
- Horizontal adjustment: 180°
- Rotating angle: 360°
- Cable management
- Dimensions: 550 x 726 x 116mm

NB The dimensions are given for indication. Only the VESA standard can tell if a screen is compatible with a given stand.

DACOMEX Tilting wall mount W70-600T for displays 37-70''

Réf. : 903136

Product features:

- For flat screen from 37 to 70 inches
- Compatible with VESA 200 x 200 to 600 x 400
- Maximum load: 50 kg
- Tilting angle: 0° to 10°
- No rotation
- Distance from wall to screen: 44 mm
- Dimensions (h x l x d): 430 x 653 x 44 mm
- Cable management: no
- Spirit level: yes
- Colour: black


A small padlock can be added to secure the screen.

Tilting full-motion wall mount for displays till 24''

Réf. : 903032

Wallmount bracket for flat screens up to 24''

Product features:

- Compatible with VESA standards up to 75 x 75 to 100 x 100
- Maximum supported load: 18 kg
- Tilting angle: -15/+15
- Pan angle: -90/+90
- No rotation
- Distance between the screen and the wall: 5.5 cm to 16.2 cm
- Cable management system
- Embedded spirit level
- Fixing kit included with all mounting screws and accessories
- Wall plate dimensions: 122 x 54 mm
- Dimensions of the fixing plate: 120 x 120 mm

Note
The dimensions are given as an indication. Only VESA and load indications can be used as a reference
for the selection of a screen.

Tilting wall mount for displays 13-27''

Réf. : 903165

- 3-axis wallmount system for LCD screen
- VESA 75/100
- For sizes 13 to 27'' an up to 15 kg
- Extensible up to 40 cm (20 cm on each side)
- Wallplate dimensions: 6 x 21

DACOMEX Desk mount for 1 monitor 13-27'' D27-100CG,- clamp - grommet base

Réf. : 903748

Save space on your desktop!

This desk mount has 2 mounting options: grommet and clamp based. So you can choose your installation
to optimize your workspace.

Easy to install, with an elegant design, it is also easy to handle. It is constructed with solid steel, and integrated with innovative counterbalance technology: the installation is easier. You can
move your monitor into the best ergonomic position.

Features:
VESA : 75 x 75 / 100 x 100
Monitor weight capacity: 2 - 6,5 kg
Screen size: 13-27''
Screen rotation: +/-180°
Tilt range: +90/-45°
Swivel range: +/-90°
Arm full extension: 450 mm
Cable management: yes
Color: black
Desktop thickness: 10-85 mm (clamp and grommet)
Material: plastic, aluminum

AAVARA Tilting wall mount EF6540 for displays 32-60''

Réf. : 902910

Product features:

- Dimensions of the screen : 32''- 60''/ 81-152 cm
- Mounting hole 725 x 450 mm
- Maximum load : 80kg / 175lbs
- Slim design : 1.89''/48mm
- Material: steel
- Tilt adjustment: 0°,5°,10°,13°,15°
- Side adjustment : the screen can be moved to the right/ left up to 20mm from the center
- Ultra slim profile: 1.89''/ 48mm
- Locking system to secure the screen in place
- Anti-theft system (padlock not included)
- Maximum expansion: 725 x 450mm
- Product dimensions: 788 x 490 x 48 mm
- Product weight: 5.2kg
- Screw type: M8,M6,M5,M4
- Guarantee: 5 years

DACOMEX Ultra-slim W80-600F-S wall mount 37-80'

Réf. : 968442

Fixed wall mount for displays 37-60''

Réf. : 903130

Universal wallmount support for 37 to 60'' screen.
The support includes a wallmounted rail and two sliders with stopping screws.

Product features:

- Dimensions of the rail: 830 mm
- Distance between the fixing holes: 40 to 770 mm
- VESA: 100 x 100 to 800 x 500
- Maximum load: 75 kg
- Tilting: no
- Rotation: no
- Rotation : non
- Distance from wall to screen : 25 mm

A small padlock can be added to secure the screen.

DACOMEX Particle board desktop monitor stand

Réf. : 903139

Tilting wall mount for displays 43-90''

Réf. : 903135

DACOMEX Screen support with wheels S70-600W for displays 37-70''

Réf. : 903256

Product features:

- VESA: 200 x 200, 400 x 200, 300 x 300, 400 x 400, 600 x 400
- Maximum supported load: 50 kg
- Tilting angle: +/-10°
- Rotation: no
- Dimensions: 880 x 665 x 1803 mm
- Shelves for camera and other audio/ video devices and accessories

Fixed wall mount for displays 15-32''

Réf. : 903033

Fixed wallmount bracket for 15 to 32'' screens.

Product features:

- Compatible with VESA 50 x 50/ 75 x 75/ 100 x 100/ 100 x 200/ 200 x 200
- Maximum supported load: 35 kg
- No tilting, no rotation
- Distance from screen to wall: 1.6 cm
- Fixing kit included
- Dimensions of the fixing plate: 22.9 x 25.2 cm

DACOMEX Desk mount D35-100CG-W, for 1 screen 17-35'', white

Réf. : 903127

AAVARA Full-motion wall mount AR011 for displays 15-24''

Réf. : 903146

Product features:

- Wallmount support with 2 arms
- Dimensions of the screen : 15''-24''/ 38-61cm
- Maximum load : 12kg
- Large Tilt +/- 15 degree and Swivel angle +/- 90 Degree
- Safety Lock to secure display in place
- Material: steel
- Dimensions: 115 x 115 x 90.7 mm
- Weight: 0.68 kg
- VESA: 75 x 75/ 100 x 100
- Screw type: M6/M5/M4
- Guarantee : 10 years

DACOMEX Ultra-slim TV wall mount W80-600T-S with tilt

Réf. : 968443

AAVARA Stand desk mount DS400 - 4 monitors

Réf. : 903003

Aavara desktop stand for 4 screens.
 
• VESA: 75 x 75, 100 x 100
• Maximum weight of the screen supported: 6 kg per screen
• Inclination: +/- 15 ° (vertical and horizontal)
• Rotation: 360 °
• Cable storage: yes
• Screws : M4 screws
• Dimensions in mm: 411 (width of foot) x 246 (depth of foot) x 730 (height of mast)
• Material: aluminum
• Black color
 
This support can be transformed into a pinch holder; For this you must use the reference 902999.

VOGEL'S Pole PUC 2715 150 cm, black

Réf. : 903279

DACOMEX Desk mount D27-100CG-3 for 3 screens 13-27'

Réf. : 903128

VOGEL'S Display interface strips PFS 3304, tilt, 80 kg

Réf. : 903322

AAVARA Full-motion wall mount AR110 for displays 15-24''

Réf. : 903145

Product features:

- Dimensions of the display: 15''-24''/ 38-61cm
- 2 pivot points
- Maximum load: 12 kg/ / 26.5lbs
- Large tilting angle +/- 20°
- Rotation: 90°
- Cable management
- Material: steel and aluminum
- Dimensions: 115 x 180 x 265 mm
- Weight: 1.04 kg
- Distance from wall: 10.4''/ 265 mm
- VESA mounting: 100 x 100 mm / 75 x 75 mm
- Screw type: M4
- Guarantee: 10 years

AAVARA Tilting wall mount EE8050 for displays 32-65''

Réf. : 902908

Product features:

- Supports 32-65''/ 81-165 cm screen
- Maximum load: 80 kg
- Features Thumb-rolling Free Tilt Angle : +/-15°
- Ultra slim profile: 2.95 inch/ 75mm
- Material: steel
- Safety Lock to secure the display in place
- Anti-theft lock (padlock not included)
- Maximum mounting : 810 x 500mm
- Dimensions du produit 788x524x75 mm
- Poids du produit : 5.2kg
- Screw type : M8,M6,M5,M4
- Guarantee : 5 years

VOGEL'S Display interface bar PFB 3407 black

Réf. : 903304

Full-motion wall mount for displays 32-70''

Réf. : 903113

DAXOMEX Flat or sloping ceiling mount C70-600FS for displays 37-70''

Réf. : 903228

DACOMEX Easel studio S65-600E TV floor stand

Réf. : 903129

VOGEL'S Display wall mount PFW 6850, turn and tilt

Réf. : 903386

Stand desk mount - 2 monitors

Réf. : 903057

DACOMEX Fixed wall mount W120-900F for screen 60-120'

Réf. : 968440

Ceiling mount for displays 37-60''

Réf. : 903231

- For 37'' to 60'' screens (please be careful with the less than 80-cm width screens)
- Supports up to 75 kg
- Arm length: 1024 to 1224 mm
- Cable management in the pipe
- VESA maxi: 800 x 500 mm
- Pan angle: up to 130°
- Tilting angle: 0 to 15°

DACOMEX Ultra-slim TV wall mount W90-800T-S with tilt

Réf. : 968445

AAVARA Stand desk mount DS200 - 2 monitors

Réf. : 902992

Dual LED/LCD Monitor stand, featuring a wide angle of +/- 15 degree tilting angle, and a 360 degree rotation. It supports VESA 100 x 100/ 75 x 75mm displays.

Product features

- Designed for 2 LED/LCD flat screens of 15-24'' / 38-61 cm
- Tilting angle: +/- 15°
- Cable management system
- VESA: 100 x 100 or 75 x 75
- Rotation angle: 360°
- Maximum load: 6 kg/ 13.2lbs per monitor
- Horizontal and vertical rotation: yes
- Screw type: M4
- Material: steel and aluminum
- Stand: 411 x 246 mm
- Tube height: 370 mm
- VESA center-to-center distance: 600 mm
- Arm length: 672 mm
- Black colour

VOGEL'S Display interface strips PFS 3306, tilt, 80 kg

Réf. : 903323

VOGEL'S Display interface strips PFS 3208, 160 kg

Réf. : 903326

PHILIPS WALLMOUNT BM05922/00

Réf. : 181477

AAVARA Tilting wall mount EF4030 for displays 26-52''

Réf. : 902920

Product features:

- Supports 26''- 52''/ 66-132cm screen
- Maximum Mounting hole 440 x 330mm
- Maximum load: 80 kg / 175lbs
- Tilting angle: 0°,5°,10°,13°,15°
- Ultra slim profile: 1.89''/ 48mm
- Material: steel
- Safety Lock to secure the display in place
- Anti-Theft Lock (padlock not included)
- Side adjustment: the screen can be moved to the right/ left up to 20mm from the center
- Product dimensions: 508 x 368 x 48 mm
- Product weight: 3.9kg
- Poids du produit :
- Screw type : M6,M5,M4 ( not suitable for screens requiring M8 screw type)
- Garantie : 5 ans

AAVARA Fixed wall mount EL1010 for displays 17-23''

Réf. : 903013

Product features:

- Flat panel size : 17''- 23''
- VESA : 75 x 75, 100 x 100
- Maximum load: 25 kg
- Tilting: no
- Rotation: no
- Distance from wall to screen: 20 mm
- Ultra slim profile : 0.78''/20mm
- Material : Steel
- Dimensions : 115 x 115 x 20 mm
- Weight : 0.26kg / 0.57lbs
- Screw type : M4

AAVARA Full-motion wall mount AR210 for displays 15-24''

Réf. : 903141

LCD Monitor Arm- 3 Pivot Points

- Flat panel size : 15''-24''/ 38-61cm
- Loading capacity : 12kg / 26.5lbs
- Tilt angle : +/-20°
- Swivel angle : +/-20°
- Rotation : Rotate Clockwise 90°
- Cable management : Smart Cable Management channels
- Material : Steel / Aluminum Alloy
- Product dimensions : 115x192x445 mm
- Product weight : 1.37kg / 3lbs
- Distance to wall : Max.17.5''/562mm
- VESA compatible : 100x100mm / 75x75mm
- Screw type : M4

AAVARA Full-motion wall mount AR240 for displays 26-52''

Réf. : 902903

LCD/ Plasma Wall Support-4 Arms with 5 Pivot Points

- Flat panel size : 26''-52''/66-132cm
- Loading capacity : 35kg / 110lbs
- Tilt angle : +/-15°
- Swivel angle : Max. +/-90°
- Extended arm provided : 2 Arms
- Cable management : Smart Cable Management System
- Material : Steel / Aluminum
- Safety lock : yes
- Max. distance to wall : 22.1''/ 550mm
- Product weight : 9.4kg/21.8lbs
- Screw type : M4,M5,M6
- Max. mounting : 400x400mm

VOGEL'S Display interface bar PFB 3409 silver

Réf. : 903305

VOGEL'S Floor plate PFF 7030, 2 poles, black

Réf. : 903266

AAVARA Clamp based monitor stand + arm for flat screen 15-24

Réf. : 903736

Product features:

- Dimensions of the display: 15-24''/38-61cm
- VESA mounting: 75 x 75, 100 x 100
- Maximum load: 12kg/ 26.5lbs
- Tilting / pan angle +/-20 degree for ideal viewing angle
- Clamp based stand
- Cable management
- ExperTorqueTM design for easy adjustment
- Material: steel and aluminum
- Adjustable height: 330 mm
- Rotation: 90°
- Screw type : M4
- Dimensions : 158 x 370 x 106 mm
- Weight: 2 kg

VOGEL'S Floor mounting plate PFF 7060, black

Réf. : 903270

Tilted wall mount for screens 60-120'

Réf. : 968441

AAVARA Stand desk mount DS300 - 3 monitors

Réf. : 902995

Screen Mount for 3 LCD Screens Aavara
 
• VESA: 75 x 75, 100 x 100
• Maximum weight of the screen supported: 6 kg
• Mast height: up to 345 mm
• Inclination: +/- 15 ° (vertical and horizontal)
• Rotation: 360 °
• Cable management: yes
• Dimensions: 370 x 1280 x 327 mm
• Supplied with screws: M4
• Material: steel / aluminum

AAVARA Full-motion wall mount AR220 for displays 26-52''

Réf. : 903144

Product features:

- Flat Panel Size: 26~52''/ 66~132cm
- Maximum load: 35 kg/ 77lbs
- Large Tilt +/- 15 degree and Swivel angle +/- 90 Degree
- Pan angle: +/-60°
- Screw type: M4, M5, M6
- Cable management
- Material: steel and aluminum alloy
- Dimensions: 230 x 420 x 562 mm
- Weight : 7.1kg
- Distance from wall : Max.22.1''/562mm
- VESA mounting: 200 x 200mm, 200 x 100mm, 100 x 100mm
- Safety lock to secure the display in place
- Garantie : 10 ans

Aavara Desktop stand forflat screen 15 to 24"

Réf. : 903730

Product features:

- Dimensions of the screens : 15''-24''/ 38-61cm
- Maximum load : 12 kg/ 26.5lbs
- Tilt/swivel angles : +/-20°
- Rotation: 90°
- Adjustable height: 100 to 335 mm
- Cable management system
- ExperTorque (TM) technology for easy adjustment
- Material: steel/ aluminum
- Dimensions of the stand: 422.5 x 240.2 x 370 mm
- Stand weight: 3.5 kg
- Screw type: M4
- VESA mounting: 100 x 100 mm / 75 x 75 mm
- Guarantee: 10 years

DACOMEX Ultra-slim TV wall mount W90-800F-S 43-90'' fixe

Réf. : 968444

AAVARA Clamp base stand with 2 arms for flat screen 15-24"

Réf. : 903738

Product features:

- Dimensions of the screens : 15''-24''/ 38-61cm
- VESA mounting : 75 x 75, 100 x 100
- Maximum load : 12 kg/ 26.5lbs for each display
- Adjustable height : up to 330 mm
- Tiltingn / swivel angles : +/-20°
- Rotation : 90°
- Cable management
- ExperTorque (TM) design for easy adjustment
- Material: steel/ aluminium
- Screw type : M4
- Product dimensions: 158 x 370 x 106 mm
- Product weight : 2.5 kg

AAVARA free style clamp stand for 2 flat screens 15 to 24"

Réf. : 903752

Free-style Dual LED Clamp-based stand with cable management. With the wide angle of - 20~90 degree Tilt, +/- 90 degree arm swivel and a 360 degree rotation, it gives you the best viewing angles for screens. It supports VESA 100 x 100/75 x 75mm display and ExperTorque (TM) technology enables adjustment of the screens hinged by its weight.

Product features:

- Designed for dual LED/LCD display 15-24''/ 38-61 cm
- Screen orientation: portrait/ landscape
- Material: steel/ aluminum allow and plastic
- VESA mounting: 75x75 / 100x100
- Maximum load: 10 kg/ 22 lbs per screen
- Dual monitor clamp stand with 4 arms and 4 pivot points
- Tilting angle: -20(down)~90(up) degree for ideal viewing angle
- Cable management system
- Supports ExperTorque (TM) Technology for easy adjustment
- Monitor rotation: 90°
- Screw type: M4

AAVARA Tilting wall mount EE5040 for displays 26-52''

Réf. : 902909

Product features:

- Dimensions of the display : 26-52''/66-132 cm
- Maximum load : 80 kg
- Thumb-rolling tilting angle: +/-15°
- Slim design : 2.76''/ 70 mm
- Material: steel
- Locking system
- Anti-theft system (padlock not included)
- Maximum expansion: 510 x 410 mm
- Weight: 3.9 kg
- Screw type : M8,M6,M5,M4
- Guarantee : 5 ans