Connectors

SHOKZ USB-C Adapter

Réf. : 778070

Slot Bracket with 2 x eSATA Ports

Réf. : 145080

Connect this slot bracket to the SATA port of your motherboard or any other SATA controller board. It adds two external eSATA connectors.

Main features:

- 2 x SATA internal connectors
- 2 x eSATA female connectors
- Cable length: 30 cm

M.2 NGFF SATA to 2.5" SATA Adapter

Réf. : 307607

6Gbps SATA III H/W RAID Controller

Product benefits:

- Rapid SSD to SATA conversion
- Natural air flow
- Same size than a 2.5'' SSD
- Can be easily adapted into a PC, laptop
- Transparent for the system
- Hardware-based RAID 1/ SPAN and PM

Main features:

- Converts 2x M.2 NGFF SATA based SSD to a standard 2.5'' 7mm SATA drive
- Supports SATA I, SATA II, SATA III Host port
- Supports 6Gbps, 3Gbps SATA-based M.2 NGFF 80/60/42/30 mm SSD
- M.2 NGFF type 2280-D5-B connector on board
- Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD
- Supports dual-sided SSD module 1.5mm component height on the top and bottom side
- Supports H/W RAID 1, SPAN (Big Drive) and PM (2Drives) Modes
- Does not support PM (2 Drives) Mode if SATA I or no Port Multiplier compatible
- SATA Host connection
- 22-pin SATA (Signals and Power) male connector on board
- 2x M.2 SSD ACT LED
- Transparent to the operating system, no driver required on Windows, Mac and Linux
- Provides Windows and Mac GUI to configure RAID modes and monitor RAID status
- Includes 7mm height 2.5'' drive metal frame with 8 mounting holes and 4 HDD screws
- Compatible with 2.5'' SATA drive dimension : 100.45mm x 69.85mm x 7mm

Molex to PCI Express 8-pin power adapter cable- 15 cm

Réf. : 146693

This adapter changes the 2 x Molex power connectors into a PCI-Express 8-pin connector to supply the
power to a graphic card.
Indispensable for the power supplies that don't have any PCI Express power connector.

Product features:

- Input connectors: 2 x Molex 4-pin male connectors
- Output connectors: 1 x PCI Express 8-pin connector
- Cable length: 15 cm.

Slot Bracket with 2 x DB9 Ports

Réf. : 145072

The slot bracket is to be connected to a motherboard or serial RS-232 card. It provides two external
DB9 male connectors.

Main features :
- 2 x HE-10 motherboard connectors
- 2 x DB-9 male connectors
- Cable length: 18 cm

HE-10 Connector Specifications:
2 4 6 8 10 (Pin # 10 poka yoke)
1 3 5 7 9 (Pin # 1 is marked)

Wiring Diagram
HE-10 - DB9 male - Signal
1 1 CD
2 2 RD
3 3 TD
4 4 DTR
5 5 Gnd
6 6 DSR
7 7 RTS
8 8 CTS
9 9 RI
10 not used

2-in-1 SATA cable with Molex power connector- 50 cm

Réf. : 147551

This adapter cable makes it possible to install and connect a SATA SSD in a computer which lacks SATA power connectors. The combo connector is compatible with Molex connectors.

Product features:

- Input connectors : 1 x 4-pin Molex male + 1 x SATA
- Output connectors: 1 x SATA (data + power)
- Cable length : 20 cm (power supply / 50 cm (SATA)

Slim SATA (CD/DVD) to SATA Adapter

Réf. : 146341

Changes the Slim SATA connector of a slim optical drive (CD/DVD) into a SATA connector with power
supply.
Compatible with Windows, Mac, and Linux operating systems, for which no drivers are required.

Main features:

- Slim SATA connector on the optical drive side
- SATA (data+power) connector on the motherboard side
- Without cable

Molex Y cable + floppy- 20 cm

Réf. : 146630

For additional device connection, such as optical drive. Indispensable for the power supplies which do not have any floppy connector.


Main features:

- Input connector: 1 x 4-pin Molex male
- Output connectors: 1 x floppy female
- Cable length: 20 cm