PoE Accessories

Dexlan Gigabit PoE Extender 802.3at + 100 M Self Powered

Réf. : 302446

Just add the PoE extender to the switch to PoE device and instantly extend the communication distance by 100 meters. It is practical if you want to install a camera or wireless access point at an over 100-meter distance from the PoE switch over copper cable, less expensive than fiber optics.

The low power consumption of the active components leaves enough power supply for the devices. Depending on the device and PoE source, it is possible to use up to 4 x PoE extenders on your Ethernet line.

For example:

1) 3.2W per extender over PoE+802.3at
30W PoE+ Source <---100m---> PoE extender <---100m---> WiFi AC access point (26.8W available)


2) 2W per extender over PoE 802.3af
15W PoE Source <---100m---> PoE extender <---100m---> IP Camera (11W available)

Product features:

- 1 x RJ-45 Gigabit PoE input port
- 1 x RJ-45 Gigabit PoE output port
- Output power depending on the source
- Dimensions: 115 x 68 x 38mm
- Can be wall-mounted with 2 screws

Planet GSD-1002VHP sw 10P gigabit with 8P poe+ & lcd screen

Réf. : 410222

The PLANET GSD-1002VHP is a Gigabit Switch with 10 ports, including 8 PoE+ ports, which supply the power and the data over a single Ethernet cable, to PoE 802.3af/at-compliant devices.
The 2 non-PoE ports can build up a link to a NVR or Internet access.

In addition, the PoE+ PLANET GSD-1002VHP switch can supply up to 120W total PoE budget and is equipped with an LCD screen providing information on each PoE-compliant connected device.
You+ll be informed in real-time about the available power resource.
The switch was designed for small CCTV installations, including combinations of indoor/outdoor cameras, day/night vision and outdoor cameras as well.

The PLANET GSD-1002VHP supports two operating modes: VLAN isolation, where each port is isolated from another, and EXTENDED, where you can build up copper links up to 250m. For the latter, please use solid-wire category 6 cable and over, with RJ-45 field connectors.

Product features:

- 10 x 10/100/1000 RJ-45 ports including 8 PoE+
- Total PoE budget: 120 W
- LCD screen indicating the power consumption of each connected device and the available PoE resource on each port
- Supports VLAN isolation mode: each camera is isolated from the other ones, providing data protection and smoother video flows
- Supports EXTENDED mode: installation of IP cameras at up to 250 meters from the switch

PLANET LRP 101U Long Reach PoE+ over UTP Extender kit 500 m

Réf. : 411111

PoE+ extender kit over category 5 cable. You can install your device at 500 meters if needed.

Insert the PoE+ kit between the switch and the device so that you can install the latter at up to 500 meters over category 5 cable. The PoE+ capability can supply the power and transmit the data at the same time.
The kit includes two modules, a transmitter and a receiver. These modules can easily be installed, without any software, over the RJ-45 interface. We recommend that you use category 5 or category 6 copper twisted pair cable and RJ-45 modular plugs.

Product features:

- Compatible with the following standards : Long Range Ethernet IEEE 1901 - PoE+ 802.3at/af
- Input/ Output : RJ45 10/100 PoE+ 30W
- Solid wire cable is recommended
- Compatible with Fast Ethernet network without PoE up to 1000m

PLANET IPOE-260-12V Indust.2 port PoE+ Injector Hub

Réf. : 410260

1-Port 30W poe+ to 2-Port 802.3af/at gigabit poe

Réf. : 410202