Fiber converters and chassis

TP-LINK MC100CM Fast Ethernet Media Converter

Réf. : 311911

The MC100CM is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC100CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC100CM supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.

Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, supports both 5VDC and 9VDC external power supply and front panel status LEDs. The MC100CM will transmit at extended fiber optic distances utilizing multi-mode fiber up to 2
kilometers(1.2 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
•Extends fiber distance up to 2km(1.2 miles)

TP-LINK MC220L Gigabit Ethernet Media Converter

Réf. : 311898

The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the SC/LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode.

Main Features:

•Complies with IEEE 802.3ab and IEEE 802.3z
•Hot-swappable FX port
•Extends fiber distance up to 0.55km(0.342 miles) for multi-mode fiber and 10km(6.2 miles) for single-mode fiber

GIGABIT 10/100/1000 TO SFP PORT MEDIA CONVERTER

Réf. : 311791

NETGEAR AGM731F

Réf. : 315100

TP-LINK TL-SM321B-2 1000BASE BX WDM BIDIRECTIONAL SFP MODULE

Réf. : 311908

TL-SM5110-SR 10Gbase-SR SFP+ LC Transceiver 300m

Réf. : 311949

SWITCH 8 RJ-45 10/100 + 1 FIBER 100FX MULTIMODE SC 2KM

Réf. : 311747

10/100/1000 to 1000SX Media conv. MultiMode Duplex SC 550m

Réf. : 311756

10/100/1000 to 1000LX Media conv. W/SFP SingleMode 20KM LC

Réf. : 311722

PLANET FTP-802 Media Converter FX to TX Multimode 2Km

Réf. : 410802

More than a Fiber Media Converter -- a Power over Ethernet Injector as well
The best data link and power sourcing solution for long reach network equipment
PLANET FTP-80x series is ideal for remote network equipment deployments, using two networking technologies:
- Media Conversion : 100Base-FX to 10/100Base-TX
- Power over Ethernet : Power Sourcing Equipment(PSE), PoE Injector
Providing both PoE and Fiber Optical interfaces, the FTP-80x is ideal for service providers, campuses and public areas requiring to deploy the PoE for wireless access points, IP-based surveillance cameras or IP phones in any places easily, efficiently and cost effectively.

Main features:

- Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX, IEEE 802.3af
- Power over Ethernet standards
- Auto negotiation for 10/100Base-TX half duplex mode or full duplex mode, auto-MDI / MDI-X function
on copper port
- IEEE 802.3x full duplex flow control and back pressure in half duplex eliminates packets loss
- Provides DC 48V power over RJ-45 Ethernet cable to devices with Ethernet port
- Auto-detect of PoE IEEE 802.3af equipment and protects devices from being damaged by incorrect installation
- 100Base-FX interface for up to 2km (multi-mode fiber 50µm/125µm, 62.5µm/125µm) on FTP-802
- 100Base-FX interface for up to 15km (single-mode fiber 9µm/125µm) on FTP-802S15
- DIP-switch: LFP (Link Fault Pass-through) mode selection
- Compact in size, easy to install
- LED indicators for easy network diagnostics

PLANET GT-802 Gigabit 1000SX Media Converter

Réf. : 411802

Key features:

- Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 1000Base-SX/LX.
- TP port supports 10/100/1000Base-T auto-negotiation and auto-MDI/MDI-X.
- 1000Base-SX: 50/125µm or 62.5/125µm multi-mode fiber cable, up to 220/550m (GT-802).
- Layer 2 key Feature
- IEEE 802.3x full-duplex flow-control and back-pressure in half-duplex eliminates the loss of packets
- Supports auto MDI/MDI-X function
- Store-and-Forward mechanism
- Non-blocking full wire-speed forwarding rate
- Media conversion between 10/100/1000Base-T and 1000Base-SX/LX.
- Wallmounting design
- LED indicators for easy network diagnostic
- LFP function available by DIP Switch
- Supports jumbo frames up to 9k
- Compact size, easy installation

PLANET IGT-905A layer II industrial converter RJ45/SFP

Réf. : 314900

The PLANET IGT-905A is a managed Gigabit media converter for professional use that can extend your network to a 10-km distance over fiber optics. The connection distance depends on the SFP transceiver module you insert.
The heavy-duty housing can stand electromagnetic interferences and power surges that often occur in industrial environments.
The managed converter keeps the VLAN Tag integrity, which can be altered by traditional media converters.

Specifications:

- Dual-Speed SFP slot, compatible with SFP Gigabit and 100 FX transceiver modules
- Redundant power supply: 12-48 V DC
- Supported temperature in operation: -30° to +75°C
- IP-30 metal housing
- Alarm relay in case of a power failure
- Ethernet ESD protection: 6 kV
- Compliant with the European requirements regarding drops, impacts and vibrations
- Can be wall-mounted or installed on a DIN rail
- Store-and-Forward architecture
- IEEE802.3x Pause frame Flow Control in Full-Duplex and backpressure in Half-Duplex
- Jumbo frame management up to 9216 bytes
- Loopback detection, storm control
- VLAN management up to 16 groups, 4K IDs/ IEEE802.1Q VLAN Tag
- Supports QoS function
- Bandwidth control on copper / fiber links
- 4 priority lines, Strict Priority, WRR
- IEEE802.1p/ IP DSCP Priority/ IP Address Priority CoS
- IP remote management by web-based interface
- Supports SNMPv1/v2/c & 4 RMON, Event trap and SNMP trap management
- DHCP/ static IP
- TS-1000 OAM / IEEE 802.3ah OAM / Loop Back Test
- Supports up to 16 TCP/UDP filtering groups
- Firmware update
- RESET button on front panel
- LCD display for temperature status

Dexlan 10/100 sfp 100FX port media converter

Réf. : 311690

This media converter is equipped with an STP RJ-45 port with auto-negotiation function and an SFP slot. You can adapt the media converter depending on your network, by inserting a MiniGBiC module (not included) for single-mode or multimode link implementation.
Depending on the transceiver, the transmission distance can reach up to 2km in multimode fiber and up to 10km in single-mode fiber.

Specifications:

- Compatible with IEEE802.3 and IEEE802.3u standards
- Data transfer rate up to 100Mbps in Full Duplex mode on the fiber and copper ports
- Auto-negotiation and Auto MDI/MDI-X functions supported by the RJ-45 port
- Compatible with IEEE802.1Q VLAN Tag and Spanning Tree protocols
- SFP slot for 100FX multimode or single-mode transceiver insertion, hot swappable
- 4 DIP switches for speed override and Link Fault Pass-through function setup

PLANET FT-802 TX to FX Bridge Media Converter- 2km

Réf. : 411702

PLANET FT-802 TX to FX is a Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber
options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of
the converter operates at 1310 nm and uses SC connectors over multimode fiber.

The FT-80x series is with LFP (Link Fault Pass through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators in case of a problem and provide efficient solutions to monitoring the net. The DIP switch allows you to disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means that when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the transmission link. LLR (Link Loss Return) means that when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmission link. Both can immediately alarm administrators of the problem on the link media and provide efficient solutions to monitoring the net.

Complies with IEEE 802.3, IEEE 802.3u 10/100Base-TX, 100Base-FX Standards
- Connectors: One RJ-45 (Auto-MDI/MDI-X) twisted pair, EIA568
- One fiber-optic, 1310nm wavelength, SC connector- 2km on multimode fiber
- Data Transfer Rate:
- TP: 10/100Mbps
- FX: 100Mbps
Duplex mode support:
- Full or half-duplex mode by Auto-Negotiation (TP)
- Full or half-duplex mode by DIP-switch (FX)
- LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
- DIP-switch: 2 DIP-switches
- Rear DIP-switch: FX duplex mode selection
- Side DIP-switch: LFP (Link Fault Pass-through) mode selection

GIGABIT SWITCH 10 PORT W/ 8 PORT SFP 1000SX/LX

Réf. : 311848

2 port 1000M PoE 30W PSE+1port 1000M SFP Fiber Optical

Réf. : 311793

XT-915A 2-Port 10G/1GBASE-X SFP+ Managed Media Converter

Réf. : 314915

MEDIA CONVERTER SINGLE MODE 100FX SC+LFP-25KM

Réf. : 311726

DEXLAN L2+ Managed Switch 24P SFP Dual Speed + 4 Giga Combo

Réf. : 320231

PLANET XT-905A

Réf. : 314910

PLANET MGB-TSX2 SX SFP Module up to 2KM -45/85°C

Réf. : 411796

HUAWEI FIBER MODULE MULTIMODE MINIGBIC SR 300M

Réf. : 101520

MEDIA CONVERTER MULTIMODE 100FX SC 2 RJ45-2 KM

Réf. : 311753

10/100/1000 to 1000LX Media conv. SingleMode 20KM SC

Réf. : 311721

Media converter Fast Ethernet to 100FX SC Multimode 2KC

Réf. : 311703