Fiber transceiver modules

SFP 1000LX compatible Cisco SMB Series

Réf. : 311775

PLANET MGB-SX2 Multimode SFP Gigabit Fiber Transceiver - 2KM

Réf. : 411798

This hybrid transceiver module uses a long-distance signal over multimode fiber, less expensive than
single-mode. This feature can extend the communication distance to 2 kilometers, compared to the traditional 550-meter limitation.

Product features:

- Duplex fiber optic port with LC connectors
- Gigabit 100LX fiber link over 50/125µm multimode fiber optic cable
- Compliant with IEEE802.3z Gigabit Ethernet standard
- Wavelength: FP 1310 nm
- Frequency: 1.25Gbps
- Power supply: +3.3 V
- Compatible with the MSA (Multi Source Agreement)
- Hot-swappable
- Compliant with SFP standard (Small Form Factor Pluggable 55.5 x 13.5 x 8.5mm)
- Class 1 Laser product, compliant with EN 6025-1 standard

PLANET MFB-FX SFP MODULE 100FX Multimode 2kms

Réf. : 411699

This 100FX Fast Ethernet transceiver module with SFP connector can be connected to a standard fiber converter.

Product features:

-Fiber port: LC Duplex
-Signal: 100FX monomode, 1310 nm
-Connection distance: up to 2 km
-Operation temperature: 0-50°C
-Fiber support: 62.5/125 & 50/125

Note
Compatible with SFP Fast Ethernet (100FX) slots only

PLANET MGB-TSX Mini GBIC SX Fiber Transceiver Module MM 550m

Réf. : 411799

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard

PLANET MGB-TLX Mini GBIC LX Transceiver Module SM- 10 km

Réf. : 411795

The extension module is designed for Gigabit Ethernet switches with SFP/Mini-GBiC slots. The module can operate under extreme temperature conditions: -40° to +75°C
The Digital Diagnostic Monitoring function provides real-time information: I/O signal, laser temperature, etc...

Product features :

- Single-mode fiber LC connector
- Gigabit fiber connection up to 10km over single-mode 9/125µm fiber
- Compatible with the following standard : IEEE802.3z Gigabit
- Wavelength : PP 1310nm
- Frequency : 1,25Gbps
- Power supply : +3,3V
- Compatible MSA Multi Source Agreement
- Hot-swappable
- SFP (Small Form factor Pluggable) 55.5 x 13.5 x 8.5mm
- Laser Class 1 compatible with EN 60825-1 directive

The module is particularly resistant to extreme temperature spreads while keeping the performance. Recommended with industrial switches.

Tp-link TL-SM321A 1000BASE-BX wdm bidirectional sfp module

Réf. : 411901

TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up
to 10Km(6.2 miles) with TP-LINK´s Routers, Switches, Media Converters, to provide high speed and stability.

Main Features:

•WDM Bi-Directional SFP Module
•Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving

PLANET MFB-F20 SFP 100 FX SFP Transceiver Single Mode 20 km

Réf. : 411695

This series of SFP modules was designed for single-mode fiber links. The modules are hot-swappable, according to the Multisource Agreement (MSA) standards, they are hot-swappable
The modules operate at 1310nm and can transmit to 20 km over 9/125µm single-mode fiber.

Product features:

- Signal: 100FX single-mode/ 1310nm @ 20 km
- Supported temperature in operation: 0-50°C
- Compatible with 9/125µm fiber

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311906

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

Tp-link TL-SM321A 1000BASE-BX wdm bidirectional sfp module

Réf. : 411902

TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up
to 10Km(6.2 miles) with TP-LINK´s Routers, Switches, Media Converters, to provide high speed and stability.

Main Features:

•WDM Bi-Directional SFP Module
•Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving

SFP 1000LX Compatible Aruba HP J4859D

Réf. : 311762

TP LINK TL SM311LS Mini GBiC Module- Single Mode LC

Réf. : 311895

TP LINK TL SM311M Mini GBiC Module- Multimode LC

Réf. : 311899

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Réf. : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

SFP 1000SX Compatible Aruba HP J4858D

Réf. : 311761

DAC SFP+ 10G 1m compatible Cisco SMB/Catalyst

Réf. : 311778

PLANET MFB-RF20 SFP 100FX Single Mode Transceiver- 20 km

Réf. : 411675

This SFP transceiver module is very resistant. It can be used within -40 to 75°C temperature range.

Specifications:

- LC Duplex connector
- Compatible with IEEE802.3u 100Base-FX @125Mbps
- Maximum transmission distance: 20 km over single mode fiber (9/125µm, OS1/OS2)
- Wavelength: 1310nm - 125Mbps
- Operating temperature : -40 to +75°C
- Can be installed outdoors, since it is protected by a housing

PLANET MGB-GT SFP Gigabit Fiber Transceiver

Réf. : 411896

The PLANET MGB-GT fiber transceiver provides an additional copper port.

Product benefits:

- Compliant with an SFP Gigabit slot (3.3V)
- Output signal: 1000Base-T Full Duplex
- RJ-45 UTP category 5/6 cable over 100 meters
- Auto MDI-MDiX function

Caution:

Compatible with SFP Gigabit slots or SFP dual-speed slots, but not compatible with SFP 100FX slots.

No Auto MDI-MDiX on the RJ-45 side: Gigabit operation only, even if the module is set to a dual-speed SFP slot.

10G SFP+ Fiber Transceiver Multi-mode DDM -40~75° C 300M

Réf. : 411899

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard

SFP+ 10G SR compatible Cisco SMB/Catalyst

Réf. : 311774

HUAWEI FIBER MODULE MULTIMODE MINIGBIC 1000SX 550M

Réf. : 101500

10G SFP+ Fiber Transceiver Multimod.1310nm DDM -40~75° C 2KM

Réf. : 411999

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard

Fiber Transceiver Module Multimode MiniGBiC 1000 SX- 550 m

Réf. : 311799

The two-directional optical fiber module for Gigabit Ethernet switch supports Digital Diagnostic Monitoring, based on the SFF-8472 industrial standard, which provides real-time information to the device (I/O signal, temperature, etc...)
The heavy-duty MGB-TSX modules are recommended for fiber optic connections.

Product features:

- Multimode Duplex fiber optic port with LC connector
- Gigabit 1000 SX optical link up to 550 m over 50/125µm/ 295m over 62.5/125µm
- Compatible with the following standards: IEEE802.3z Gigabit
- Wavelength: VCSEL 850 nm
- Frequency range: 1.25 Gbps
- Power supply: +3.3 V
- Compatible with MSA (Multi Source Agreement)
- Hot-swappable
- Supports Digital Diagnostic Monitoring
- Compatible with the SFP form factor specifications (55.5 x 13.5 x 8.5mm)
- Class 1 Laser product/compliant with EN 60825-1 standard

10GBase-SR sfp+ module multimode 300m +ddm

Réf. : 311829

Bi-directional module for Ethernet Gigabit switches equipped with SFP+ slots.
The module supports the Digital Diagnostic function, based on the SFF-8472 industrial standard. This
function allows the device to receive I/O signal, laser temperature and other information in real-
time.

Product features:

- Fiber optic port: Duplex multimode with LC connectors
- Compatible with the SFF-8431 (SFP+) standard
- Fiber optic link: 10 Gigabit up to 300 meters over 50/125µm (OM1 33m/ OM2 82m/ OM3 300m)
- Ethernet Standard: IEEE802.3ae 10GBASE-SR and 10GBASE-SW
- Supports DDM [Digital Diagnostic Monitoring] function=SFF8472 Rev.9.2
- Wavelength: VCSEL 850nm
- Maximum data transfer rate: 10.3125Gbps
- Power supply: +3.3V
- Compatible with MSA [Multi Source Agreement]
- Hot-swappable
- Embedded DDM function
- Compliant with SFP form factor: 57 x 13.3 x 8.5mm
- Class 1 Laser product, compatible with EN 60825-1 standard
- Supported temperature in operation: 0~70°C

Allied at-spsx sfp optical module, 1000SX, 220m/550m

Réf. : 522799

FiberTransceiver module Single Mode MiniGBiC 1000 LX -10 km

Réf. : 311795

Bidirectional long-distance fiber module for Ethernet switch equipped with SFP ports.
The digital diagnostic monitoring interface for optical transceivers allows real-time access to
the device's operating parameters.

Product features:

- Duplex Single mode fiber port with LC connectors
- Gigabit link up to a 10-km distance over single mode 9/125µm
- Compliant with the IEEE802.3z Gigabit standard
- Wavelength: PP 1310nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- MSA-compatible
- Hot-swappable
- Digital Diagnostic Monitoring technology
- SFP-compatible (Small Form Factor Pluggable): 55.5 x 13.5 x 8.5mm
- Class 1-compatible Laser product, compliant with the EN 60825-1 standard.