Fiber transceiver modules

SFP Pluggable Optical Module, 1000BX, 20km, Single mode, Single fiber [Tx=1490,R

Réf. : 522795

NETGEAR AGM732F

Réf. : 315110

NETGEAR AX743

Réf. : 315010

TP-LINK MC111CS WDM Fast Ethernet Media Converter

Réf. : 311906

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half the cabling. Designed following the IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is compatible with single-mode fiber cable over the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.

Other features of this module include the ability to be used as a stand-alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers(12.4 miles).

•Complies with 802.3u 10/100Base-TX, 100Base-FX standards
•Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
•Adopts WDM technology, transmitting and receiving data on one single fiber

ALLIED TELESIS AT-SPLX10/I

Réf. : 746349

Tp-link TL-SM321A 1000BASE-BX wdm bidirectional sfp module

Réf. : 411901

TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up
to 10Km(6.2 miles) with TP-LINK´s Routers, Switches, Media Converters, to provide high speed and stability.

Main Features:

•WDM Bi-Directional SFP Module
•Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving

Rackmountable 1RU Tray for up to 6 Units of MMC Series

Réf. : 522206

10GBase-T SFP+ Module

Réf. : 522846

SFP+ Direct attach cable, Twinax, 7m (0 to 70øC)

Réf. : 522848

SFP Pluggable Optical Module, 1000BX, 10km, Single mode, Single fiber [Tx=1490,R

Réf. : 522794

SFP 1000LX compatible Cisco Catalyst

Réf. : 311780

Tp-link TL-SM321A 1000BASE-BX wdm bidirectional sfp module

Réf. : 411902

TP-LINK´s TL-SM321A adopts the latest standard 1000Base-BX, transmission over a single strand of fiber, with one different wavelength going in each direction. You can extend the network distance up
to 10Km(6.2 miles) with TP-LINK´s Routers, Switches, Media Converters, to provide high speed and stability.

Main Features:

•WDM Bi-Directional SFP Module
•Supports WDM Bi-Directional technology, using a single strand of fiber, cost saving

SFP+ Direct attach cable, Twinax, 3m (0 to 70øC)

Réf. : 522847

HUAWEI FIBER MODULE MULTIMODE MINIGBIC 1000SX 550M

Réf. : 101500

SFP ALLIED TELESIS SPLX10A

Réf. : 522007

Multi-mode 100Mbps sfp fiber transceiver (2KM) -40/75°C

Réf. : 411679

This 100FX fiber module can be connected to a media converter over SFP slot.
The module can operate in extreme conditions, while keeping the performance. This is the reason why we recommend it for industrial switches.

Product features:

- Fiber optics port : LC Duplex.
- Compatible with IEEE 802.3u 100Base-FX 125Mbps standards
- Connection distance : Mulitmode - 2kms / fiber 62.5/125
- Wavelength : 1310nm - 125Mbps
- Operating temperature range : -40°C to +75°C (housing)


Note
The module operates only over SFP slot in a Fast Ethernet (100FX) configuration only.

SFP Pluggable Optical Module, 100BX, 15km, Single mode, Single fiber [Tx=1550,Rx

Réf. : 522691

SFP Pluggable Optical Module, 1000BX, 10km, Single mode, Single fiber [Tx=1310,R

Réf. : 522793

SFP Pluggable Optical Module, 1000BX, 20km, Single mode, Single fiber [Tx=1310,R

Réf. : 522797

PLANET MGB-TLX Mini GBIC LX Transceiver Module SM- 10 km

Réf. : 411795

The extension module is designed for Gigabit Ethernet switches with SFP/Mini-GBiC slots. The module can operate under extreme temperature conditions: -40° to +75°C
The Digital Diagnostic Monitoring function provides real-time information: I/O signal, laser temperature, etc...

Product features :

- Single-mode fiber LC connector
- Gigabit fiber connection up to 10km over single-mode 9/125µm fiber
- Compatible with the following standard : IEEE802.3z Gigabit
- Wavelength : PP 1310nm
- Frequency : 1,25Gbps
- Power supply : +3,3V
- Compatible MSA Multi Source Agreement
- Hot-swappable
- SFP (Small Form factor Pluggable) 55.5 x 13.5 x 8.5mm
- Laser Class 1 compatible with EN 60825-1 directive

The module is particularly resistant to extreme temperature spreads while keeping the performance. Recommended with industrial switches.

2 x 10Gigabit XFP Expansion Module

Réf. : 522702

Quad SFP+ (QSFP+) Direct attach cable, Twinax, 1m (0 to 70øC)

Réf. : 522842

SFP Pluggable Optical Module, 100BX, 15km, Single mode, Single fiber [Tx=1310,Rx

Réf. : 522692

HUAWEI FIBER MODULE SINGLEMODE MINIGBIC 1000LX 10KM

Réf. : 101510

10G SFP+ Fiber Transceiver Multi-mode DDM -40~75° C 300M

Réf. : 411899

This long-distance bi-directional transceiver module is designed for Gigabit Ethernet switches.
The module can stand temperature spreads and is fit for industrial environments.

Product features:

- Supports 1000SX fiber optic link up to 550 m over multimode fiber (50/125µm)/ 295 m (62.5/125µm)
- Compliant with the following Ethernet standard: IEEE802.3z Gigabit
- Wavelength: VCEL 850nm
- Frequency: 1.25Gbps
- Power supply: +3.3V
- Operating temperature: -40~+75°C
- Compliant with MSA Multi-Source Agreement
- Hot-swappable
- Compliant with SFP standard (Small Form factor Pluggable=55.5 x 13.5 x 8.5mm)
- Class 1 laser product, compliant with EN 60825-1 standard