Switches

Industrial 802.3at (30W) high power poe injector

Réf. : 314162

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

PLANET IGS-5225-4P2S SW.INDUST L2 8 GIGABIT + 2 SFP 100FX/1G

Réf. : 314834

PLANET IGS-4215-4P4T Industrial Switch 8 Giga Ports 4 PoE+

Réf. : 314846

The PLANET IGS-4215 4P4T2S is a layer 2 industrial switch with 8 Ethernet Gigabit ports including 4 PoE+ ports. In addition, the 2 dual-speed SFP ports provide fiber optic connection.
The switch can supply 30 W per port. In addition, two dual-speed SFP ports are available for fiber optic connection. The switch supports the usual layer 2 functions, including VLAN, IGMP, and Spanning Tree, as well as a smart PoE management function. If after 3 attempts, there is no answer, the switch automatically reboots the device and sends an E-mail notification to the network administrator. There is no need to send a technician to reboot the switch.
The programming schedule disconnects the power supply of idle devices connected to the switch. It is
easier to disable Wi-Fi hot-spots or telephones during the night, while keeping active the CCTV system.

1-Port Ultra PoE to 4-Port 802.3af/at Gigabit PoE Extender

Réf. : 410174

The IPOE-E174 PoE switch has an IP-30 protection index. The components can stand extreme temperatures that can be found in storage and production facilities, from -40°C to +75°C
Moreover, the switch can be installed outdoors if protected by a weatherproof housing.

The switch operates with a 30-W Gigabit PoE+ injector. In this configuration, the automatic PoE management will provide the power to only 2 x PoE 802.3af devices.
You can as well build up an up to 200-meter link by placing the switch in the middle (100 meters upstream/ 100 meters downstream).

Product benefits:

- 1 x RJ-45 Gigabit Ultra PoE input, 60W max.
- 4 x RJ-45 Gigabit PoE+ outputs, 30W max.
- PoE power usage LED indicator (25%, 50%, 75%)
- Extreme heat/ cold operation temperature range: -40~75°C
- Automatically detects the connected powered devices (PD)
- Long-distance link: 100 meters upstream and 100 meters downstream from the switch

PLANET IGPT-815AT SFP 100/1G to 10/100/1000 PoE+ 30W

Réf. : 314810

Industrial 802.3at (30W) high power poe injector

Réf. : 410176

The PLANET IPOE-162 industrial PoE+ injector provides the PoE function to a Gigabit Ethernet connection. The injector supplies the power to operate a 802.3af/at-compatible IP camera or Wi-Fi hot-spot over RJ-45 cable, at an up to 100-meter distance.

The industrial design and high-quality components make this injector sturdy enough to endure extreme
temperatures and humidity rates, so that it can be installed in a warehouse or production facility. The injector can also be installed outdoors in a weatherproof housing.

Product features:

- IP30 (-40° à +75°C)
- Can be wall-mounted or fixed on a 35-mm DIN rail
- 1 x RJ-45 input port (''DATA'' 10/100/1000Mbps)
- 1 x RJ-45 output port (''DATA+Power'' 10/100/1000Mbps)
- Compatible with the following PoE standards: 802.3at 30W max in MidSpan mode 4/5(+), 7/8(-)
- Input power: 24/48 V DC/ 24 V AC
- Redundant power supply for permanent use (24/24)
- Default relay alarm on terminal block

PLANET IGS-4215-4P4T Industrial Switch. 8P giga with 4 poe+

Réf. : 314844

The PLANET IGS-4215 is a layer 2 industrial switch with 8 Ethernet gigabit ports, including 4 x PoE+
ports. The switch supplies 30 W per port and supports the usual Layer 2 functions, including VLAN, IGMP, and Spanning Tree. In addition, the smart PoE function automatically reboots the switch after 3 attempts with no response. Simultaneously, an alert is sent by E-mail to the network administrator. There is no need to send a technician for maintenance to reboot the switch.

Besides, the embedded programming schedule disconnects the power supply of idle devices connected to
the switch. It is possible to disable Wi-Fi hot-spots or telephones during the night, while keeping active the CCTV system.

IP30 Industrial Gigabit Fiber Converter PoE RJ45/ SFP

Réf. : 314825

The PLANET IGTP-805AT media converter is equipped with an SFP fiber optic port and an RJ-45 Gigabit PoE high-power port, which can supply up to 30-W power to a PTZ camera, or a high-resolution camera.
The fiber connection can reach up to 500 meters if you use multimode fiber and up to 10 kilometers if you use single mode fiber.

The PoE port is compliant with Dual-Band and 802.11a/c devices.

Specifications:

- RJ-45 Port: 10/100/ 100Mbps with PoE+ 30W injector
- PoE802.3at output, compatible with 802.3af
- Dual Speed SFP port for 100FX/1000SX/LX transceiver
- 6-pin terminator (24 or 48V) for alarm output and redundant power supply
- Dimensions: 135 x 87 x 32mm
- Can be installed on a DIN rail or wall-mounted
- Stands temperatures from -40°C to +75°C in operation

Planet IGS-10020HPT L2 Industrial Switch 8 Giga PoE+& 2 SFP

Réf. : 314892

The PLANET IGS-10020 HPT was specifically designed for IP camera and wireless hot-spots installation, indoors and outdoors.
The two dual-speed fiber ports and layer 2 management functions provide smooth video and data flows.
The 8 PoE ports make it easier to deploy the system in spots where there is a lack of power outlets.
The switch supports Watchdog function, which automatically reboots idle PoE devices and facilitates the maintenance.

PLANET IPOE-260-12V Indust.2 port PoE+ Injector Hub

Réf. : 410260

IGS-504HPT 5-Port gigabit switch with 4-Port 802.3AT poe+

Réf. : 314804

The PLANET IGS-504HPT has 4 x PoE+ 802.3af/at Gigabit ports. The switch also has a 5th Gigabit port
for Internet/ Intranet access.

The IP30 housing can stand temperatures from -45° to +75° and is suitable for outdoor use if protected from liquids.

Product benefits:

- 5 x RJ-45 10/100/1000 ports with auto MDI/MDI-X function
- 4 x PoE+ injector ports supplying up to 30 W
- LED indicator for PoE in-use (30/60/90/120W)
- Redundant power supply over terminal block and alarm relay output
- Compatible with PoE+ 802.3at 30W Endspan (Pins 1.2.3.6)
- Switch fabric: 10 Gbps
- DIN rail and wallmount installation
- Optional power supply: DC 48 V/ 2.5 A (120 W)

ALLIED TELESIS AT-IE340-20GP-80

Réf. : 522320

ALLIED TELESIS AT-IE340-12GP-80

Réf. : 522343

PLANET IGS-10020PT L2 Industrial Switch 8 Giga PoE & 2 SFP

Réf. : 314890

The PLANET IGS-10020TP was designed for IP and Hot-spot installation, indoor and outdoors.

The 2 dual-speed fiber ports and layer 2+ advanced management functions provide smooth video and data flows. The 8 PoE ports make it simple to install CCTV networks and wireless communication in places where there is a lack of power outlets.

The switch supports Watchdog function, which automatically reboots idle PoE devices, thus preventing
the hassle of sending a technician on site for maintenance each time a camera is down.

In addition, the programming schedule makes it possible to setup the powering on/off of connected PoE devices. For example, you can disable the wireless APs during the night, whilst keeping the IP camera activated, preventing any intruder to use your wireless network during the night without compromising your CCTV network.
The switch is also equipped with the usual layer 2+ features, such as VLAN, IGMP, Spanning Tree, QoS, and can be remotely accessed, in-band (web/SNMP) and out-band (RS-232 protocol)

PLANET Industrial Switch PoE 10/100 - 5 Ports

Réf. : 314704

4-port PoE 802.3af industrial switch
Copper or Optical fiber input connector
Active PoE switch for the self-powering of 4 x devices over RJ-45 port up to a 100-meter distance
Can stand -45° to 75°C temperature conditions, outdoor installation.
On the network input, the maximum distance will be of 100 m over copper connection.
- Network input: RJ-45
- Compatible with PoE PoE 802.3af 15.4w (pin 1,2,3,6)
- Mounting kit for DIN rail or wallmount installation
- 24/ 48V power supply / PoE 48V